PartsTable
Technical Data Sheet
PartsTable / MRO / R-5
R-5 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include height: 0.625 INCHES NOMINAL IN, diameter: 2.000 INCHES NOMINAL IN, material: ALUMINUM BLADE, body_style: ROUND SHAPE, bore_shape: STRAIGHT, cone_width: 1.2205 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-087-3155, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ R-5
NSN: 5310-00-087-3155
FSC: 5310
CAGE: 92830 — BARNES GROUP INC. DBA ASSOCIATED SPRING DIV ASSOCIATED SPRING BRISTOL (USA)
SPECIFICATIONS
height0.625 INCHES NOMINAL IN
diameter2.000 INCHES NOMINAL IN
materialALUMINUM BLADE
body_styleROUND SHAPE
bore_shapeSTRAIGHT
cone_width1.2205 INCHES NOMINAL IN
flow_angle90.0 DEGREES
leg_length2.250 INCHES NOMINAL ALL ENDS IN
body_length1.375 INCHES NOMINAL IN
design_typeADJUSTABLE STREAM
element_typeDYNAMIC
tip_quantity4
NSN5310-00-087-3155
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: R-5 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.729 INCHES MINIMUM AND 0.739 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.009 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1095 OVERALL
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7947 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
HOLE DIAMETER: 0.526 INCHES MINIMUM AND 0.536 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER0.729 INCHES MINIMUM AND 0.739 INCHES MAXIMUM IN
MATERIAL THICKNESS0.009 INCHES NOMINAL IN
MATERIALSTEEL COMP 1095 OVERALL
SURFACE TREATMENTCADMIUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7947 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
HOLE DIAMETER0.526 INCHES MINIMUM AND 0.536 INCHES MAXIMUM IN
OVERALL HEIGHT0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 31
35Interchangeable
Pago tarjeta de credito
interchangeable
X380-13Interchangeable
interchangeable cross-reference
interchangeable
PPC95Interchangeable
interchangeable cross-reference
interchangeable
140BInterchangeable
interchangeable cross-reference
interchangeable
R3Interchangeable
interchangeable cross-reference
interchangeable
1140GInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy R-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is R-5?
R-5 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).
What parts can replace R-5?
There are 31 known substitutes for R-5: 35, X380-13, PPC95 and 28 more. Substitute compatibility should be verified for your specific system.
Is R-5 still available?
R-5 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — R-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026