PartsTable
Technical Data Sheet
Download PDF

QS200M104S — CLAMP,HOSE

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

QS200M104S: CLAMP,HOSE.

The CLAMP,HOSE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, load_rating: 18.000 POUNDS MINIMUM AND 22.000 POUNDS MAXIMUM LBS, coil_quantity: 16, overall_width: 0.563 INCHES NOMINAL IN, inside_diameter: 4.125 INCHES MINIMUM AND 7.000 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5360-00-424-8144, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
QS200M104S
NSN: 5360-00-424-8144
NIINs: 004248144, 013417586
FSC: 5360 — Coil, Flat, Leaf, and Wire Springs
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
end_styleSPRING END,SQUARED AND GROUND BOTH ENDS
load_rating18.000 POUNDS MINIMUM AND 22.000 POUNDS MAXIMUM LBS
coil_quantity16
overall_width0.563 INCHES NOMINAL IN
inside_diameter4.125 INCHES MINIMUM AND 7.000 INCHES MAXIMUM IN
style_designatorWIRE
spring_free_length2.062 INCHES NOMINAL IN
coil_helix_directionRIGHT-HAND OR LEFT-HAND
fastening_device_typeCOLLARED SLOTTED HEAD SCREW
spring_deflection_rate35.200 POUNDS PER INCH NOMINAL LBS
spring_length_under_load1.500 INCHES NOMINAL IN
NSN5360-00-424-8144
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available CLAMP,HOSE TITLE COMPONENT PN QS200M104S MFR CLAMP,HOSE
KEY FEATURES
•
SPRING FREE OUTSIDE DIAMETER: 0.500 INCHES NOMINAL IN
•
LOAD RATING: 18.000 POUNDS MINIMUM AND 22.000 POUNDS MAXIMUM LBS
•
END STYLE: SPRING END,SQUARED AND GROUND BOTH ENDS
•
STYLE DESIGNATOR: CYLINDRICAL
•
SPRING FREE LENGTH: 2.062 INCHES NOMINAL IN
•
SPRING DEFLECTION RATE: 35.200 POUNDS PER INCH NOMINAL LBS
•
INSIDE DIAMETER: 0.356 INCHES NOMINAL IN
•
SPRING LENGTH UNDER LOAD: 1.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SPRING FREE OUTSIDE DIAMETER0.500 INCHES NOMINAL IN
LOAD RATING18.000 POUNDS MINIMUM AND 22.000 POUNDS MAXIMUM LBS
END STYLESPRING END,SQUARED AND GROUND BOTH ENDS
STYLE DESIGNATORCYLINDRICAL
SPRING FREE LENGTH2.062 INCHES NOMINAL IN
SPRING DEFLECTION RATE35.200 POUNDS PER INCH NOMINAL LBS
INSIDE DIAMETER0.356 INCHES NOMINAL IN
SPRING LENGTH UNDER LOAD1.500 INCHES NOMINAL IN
SPRING SOLID OUTSIDE DIAMETER0.500 INCHES NOMINAL IN
COIL QUANTITY16
SUBSTITUTES & CROSS-REFERENCES 1
56475DReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy QS200M104S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is QS200M104S?
QS200M104S is a CLAMP,HOSE.
What parts can replace QS200M104S?
There is 1 known substitute for QS200M104S: 56475D. Substitute compatibility should be verified for your specific system.
What is the NSN for QS200M104S?
QS200M104S is cataloged in the U.S. Government catalog under NSN 5360-00-424-8144. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — QS200M104S

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.