PartsTable
Technical Data Sheet
Download PDF

QQ-C-40 — CAULKING LEAD

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

QQ-C-40: CAULKING LEAD.

The CAULKING LEAD is a the manufacturer industrial component. Key specifications include weight: 9.0 POUNDS MINIMUM AND 36.0 POUNDS MAXIMUM LBS, material: LEAD, composition_and_percentage: 99.70 MINIMUM BY VOLUME LEAD, nondefinitive_spec/std_data: 1 TYPE AND AA GRADE AND LINKED INGOT FORM, impurities_limitation_in_percent: ANTIMONY0.020. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-171-6545, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
QQ-C-40
NSN: 5330-00-171-6545
NIINs: 001716545, 001850030, 002508035, 002645050
FSC: 5330 — Packing and Gasket Materials
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
weight9.0 POUNDS MINIMUM AND 36.0 POUNDS MAXIMUM LBS
materialLEAD
supplementary_featuresMINIMUM OF 99.7 PERCENT LEAD, MAXIMUM OF 0.02 PERCENT ANTIMONY AND ARSENIC; ROPE FORM; WEIGHTS 0.3 TO 0.7 POUNDS PER LINEAR FOOT; LEAD STRANDS DIAMETER OF 0.005 TO 0.157 INCH LBS
composition_and_percentage99.70 MINIMUM BY VOLUME LEAD
nondefinitive_spec/std_data1 TYPE AND AA GRADE AND LINKED INGOT FORM
impurities_limitation_in_percentANTIMONY0.020
general_characteristics_item_descriptionMINIMUM OF 99.7 PERCENT LEAD; MAXIMUM OF 0.02 PERCENT ANTIMONY AND ARSENIC; ROPE FORM; WEIGHTS 0.3 TO 0.7 POUNDS PER LINEAR FOOT; LEAD STRANDS DIAMETER OF 0.005 TO 0.157 INCHES LBS
NSN5330-00-171-6545
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: QQ-C-40 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SUPPLEMENTARY FEATURES: MINIMUM OF 99.7 PERCENT LEAD, MAXIMUM OF 0.02 PERCENT ANTIMONY AND ARSENIC; ROPE FORM; WEIGHTS 0.3 TO 0.7 POUNDS PER LINEAR FOOT; LEAD STRANDS DIAMETER OF 0.005 TO 0.157 INCH LBS
•
MATERIAL: LEAD
TECHNICAL CHARACTERISTICS
SUPPLEMENTARY FEATURESMINIMUM OF 99.7 PERCENT LEAD, MAXIMUM OF 0.02 PERCENT ANTIMONY AND ARSENIC; ROPE FORM; WEIGHTS 0.3 TO 0.7 POUNDS PER LINEAR FOOT; LEAD STRANDS DIAMETER OF 0.005 TO 0.157 INCH LBS
MATERIALLEAD
SUBSTITUTES & CROSS-REFERENCES 1
A-A-1189Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy QQ-C-40?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is QQ-C-40?
QQ-C-40 is a CAULKING LEAD.
What parts can replace QQ-C-40?
There is 1 known substitute for QQ-C-40: A-A-1189. Substitute compatibility should be verified for your specific system.
What is the NSN for QQ-C-40?
QQ-C-40 is cataloged in the U.S. Government catalog under NSN 5330-00-171-6545. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — QQ-C-40