QQ-A-200/4 — Technical Data Sheet

✓ Verified by PartsTable

— · COMPONENT

WHAT YOU NEED TO KNOW

Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel

Confirm exact part number — similar PNs may be different parts

PRODUCT OVERVIEW

The BRACKET,VEHICULAR COMPONENTS is a the manufacturer industrial component. Key specifications include shape: SQUARE, length: 2.000 FEET NOMINAL FT, material: ALUMINUM ALLOY 5083, overall_width: 1.750 INCHES NOMINAL IN, heat_treatment: H-111 STRAIN HARDENED, overall_height: 1.00 INCHES NOMINAL1.00 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 9540-01-108-5039, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

QQ-A-200/4

NSN: 9540-01-108-5039
FSC: 9540
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)

SPECIFICATIONS

shape	SQUARE
length	2.000 FEET NOMINAL FT
material	ALUMINUM ALLOY 5083
overall_width	1.750 INCHES NOMINAL IN
heat_treatment	H-111 STRAIN HARDENED
overall_height	1.00 INCHES NOMINAL1.00 INCHES NOMINAL IN
overall_length	1.00 INCHES NOMINAL1.00 INCHES NOMINAL IN
first_tip_style	SQUARE END
special_features	USED ON M2 AND M3 BRADLEY FIGHTING VEHICLES
basic_shape_style	ANGLE
left_inside_angle	90.0 DEGREES NOMINAL
fabrication_method	EXTRUDED
NSN	9540-01-108-5039

COMPONENT DIAGRAM

KEY FEATURES

•

FABRICATION METHOD: EXTRUDED

•

MATERIAL: ALUMINUM ALLOY 5083

•

SECOND TIP RELATIONSHIP TO FIRST TIP: IDENTICAL

•

FIRST TIP STYLE: SQUARE END

•

TEST DATA DOCUMENT: 19207-12299294-2 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)

•

LEFT SIDE FLANGE THICKNESS: 0.250 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS (FLIS)

FABRICATION METHOD	EXTRUDED
OVERALL HEIGHT	1.000 INCHES NOMINAL IN
MATERIAL	ALUMINUM ALLOY 5083
SECOND TIP RELATIONSHIP TO FIRST TIP	IDENTICAL
FIRST TIP STYLE	SQUARE END
TEST DATA DOCUMENT	19207-12299294-2 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
OVERALL WIDTH	1.500 INCHES NOMINAL IN
LEFT SIDE FLANGE THICKNESS	0.250 INCHES NOMINAL IN
FILLET RADIUS WHERE LEFT FLANGE JOINS BASE FLANGE	0.030 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM B221 ASSN STD SINGLE MATERIAL RESPONSE

VERIFIED SUBSTITUTES & CROSS-REFERENCES 6

ASTM B221Interchangeable