QOL13DTL7A — BEARING,BALL,DUPLEX

✓ Government record, cited

— · TAPERED BEARING

PRODUCT OVERVIEW

QOL13DTL7A: BEARING,BALL,DUPLEX.

The BEARING,BALL,DUPLEX is a the manufacturer industrial component. Key specifications include material: PLASTIC PHENOLIC RETAINER, bore_diameter: 65.0 MILLIMETERS NOMINAL MM, contact_angle: 15.0 DEGREES NOMINAL, overall_width: 36.0 MILLIMETERS NOMINAL MM, load_direction: ANGULAR, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-323-1180, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

QOL13DTL7A

NSN: 3110-01-323-1180
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)

SPECIFICATIONS

material	PLASTIC PHENOLIC RETAINER
bore_diameter	65.0 MILLIMETERS NOMINAL MM
contact_angle	15.0 DEGREES NOMINAL
overall_width	36.0 MILLIMETERS NOMINAL MM
load_direction	ANGULAR
surface_finish	GROUND
special_features	PAIR OF BEARINGS GROUND FOR UNIVERSAL MOUNTING
style_designator	UNIVERSAL GROUND FACES, COUNTERBORED OUTER RING, NON-SEPARABLE
overall_outside_diameter	100.0 MILLIMETERS NOMINAL MM
bearing_preload_designation	LIGHT
retainer_fabrication_method	MOLDED
standard_tolerance_designation	ABEC NO.7
NSN	3110-01-323-1180

COMPONENT DIAGRAM

KEY FEATURES

•

RETAINER FABRICATION METHOD: MOLDED

•

SURFACE FINISH: GROUND

•

BEARING PRELOAD DESIGNATION: LIGHT

•

STYLE DESIGNATOR: UNIVERSAL GROUND FACES, COUNTERBORED OUTER RING, NON-SEPARABLE

•

OVERALL OUTSIDE DIAMETER: 100.0 MILLIMETERS NOMINAL MM

•

CONTACT ANGLE: 15.0 DEGREES NOMINAL

•

LOAD DIRECTION: ANGULAR

TECHNICAL CHARACTERISTICS

RETAINER FABRICATION METHOD	MOLDED
SURFACE FINISH	GROUND
BEARING PRELOAD DESIGNATION	LIGHT
STYLE DESIGNATOR	UNIVERSAL GROUND FACES, COUNTERBORED OUTER RING, NON-SEPARABLE
OVERALL WIDTH	36.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER	100.0 MILLIMETERS NOMINAL MM
CONTACT ANGLE	15.0 DEGREES NOMINAL
LOAD DIRECTION	ANGULAR
SPECIAL FEATURES	PAIR OF BEARINGS GROUND FOR UNIVERSAL MOUNTING
STANDARD TOLERANCE DESIGNATION	ABEC NO.7

OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722

SUBSTITUTES & CROSS-REFERENCES 2

2MM9113WICRDULSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

113KRDULNUMBER7BKSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy QOL13DTL7A?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is QOL13DTL7A?

QOL13DTL7A is a BEARING,BALL,DUPLEX.

What parts can replace QOL13DTL7A?

There are 2 known substitutes for QOL13DTL7A: 2MM9113WICRDUL, 113KRDULNUMBER7BK. Substitute compatibility should be verified for your specific system.

What is the NSN for QOL13DTL7A?

QOL13DTL7A is cataloged in the U.S. Government catalog under NSN 3110-01-323-1180. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

QOL13DTL7A — BEARING,BALL,DUPLEX

Request a Quote — QOL13DTL7A