PartsTable
Technical Data Sheet
Download PDF

QN34BS5 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

QN34BS5: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL INNER RING, bore_shape: STRAIGHT, load_direction: RADIAL, surface_finish: GROUND, special_features: GREASE GROOVE IN ID OF OUTER RING,0.1090 IN. DIA HOLE SIN FLANGE SPACED 120 DEG APART IN, internal_fit-up_designation: STANDARD.

This part is cataloged in the U.S. Government catalog under NSN 3110-00-278-7464, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
QN34BS5
NSN: 3110-00-278-7464
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL INNER RING
bore_shapeSTRAIGHT
load_directionRADIAL
surface_finishGROUND
special_featuresGREASE GROOVE IN ID OF OUTER RING,0.1090 IN. DIA HOLE SIN FLANGE SPACED 120 DEG APART IN
internal_fit-up_designationSTANDARD
retainer_fabrication_methodMACHINED
standard_tolerance_designationABEC NO.5
NSN3110-00-278-7464
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: QN34BS5 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.5
•
MATERIAL: STEEL OUTER RING
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMACHINED
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
SPECIAL FEATURESGREASE GROOVE IN ID OF OUTER RING,0.1090 IN. DIA HOLE SIN FLANGE SPACED 120 DEG APART IN
STANDARD TOLERANCE DESIGNATIONABEC NO.5
MATERIALSTEEL OUTER RING
MATERIALSTEEL INNER RING
MATERIALPLASTIC PHENOLIC RETAINER
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 2
719814-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
Z97Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy QN34BS5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is QN34BS5?
QN34BS5 is a BEARING,BALL,ANNULAR.
What parts can replace QN34BS5?
There are 2 known substitutes for QN34BS5: 719814-1, Z97. Substitute compatibility should be verified for your specific system.
What is the NSN for QN34BS5?
QN34BS5 is cataloged in the U.S. Government catalog under NSN 3110-00-278-7464. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — QN34BS5