PartsTable
Technical Data Sheet
Download PDF

QH20306DFL1A — RESISTOR,FIXED,COMPOSITION

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

QH20306DFL1A: RESISTOR,FIXED,COMPOSITION.

The RESISTOR,FIXED,COMPOSITION is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 30.00 MILLIMETERS NOMINAL MM, overall_width: 38.0 MILLIMETERS NOMINAL MM, load_direction: ANGULAR, surface_finish: GROUND, special_features: ANGULARITY 25 DEG OR LESS. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-156-6803, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
QH20306DFL1A
NSN: 3110-00-156-6803
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter30.00 MILLIMETERS NOMINAL MM
overall_width38.0 MILLIMETERS NOMINAL MM
load_directionANGULAR
surface_finishGROUND
special_featuresANGULARITY 25 DEG OR LESS
style_designatorCOUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING
overall_outside_diameter72.00 MILLIMETERS NOMINAL MM
bearing_preload_designationLIGHT
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.1
NSN3110-00-156-6803
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: QH20306DFL1A · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
SURFACE FINISH: GROUND
•
BEARING PRELOAD DESIGNATION: LIGHT
•
STYLE DESIGNATOR: COUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING
•
OVERALL OUTSIDE DIAMETER: 72.00 MILLIMETERS NOMINAL MM
•
LOAD DIRECTION: ANGULAR
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
SURFACE FINISHGROUND
BEARING PRELOAD DESIGNATIONLIGHT
STYLE DESIGNATORCOUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING
OVERALL WIDTH38.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER72.00 MILLIMETERS NOMINAL MM
LOAD DIRECTIONANGULAR
SPECIAL FEATURESANGULARITY 25 DEG OR LESS
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE DIAMETER30.00 MILLIMETERS NOMINAL MM
SUBSTITUTES & CROSS-REFERENCES 3
7306DFReference document
Same NSN cross-reference
Reference document — Secondary reference
H20306DFL1215AReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
20306DFReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy QH20306DFL1A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is QH20306DFL1A?
QH20306DFL1A is a RESISTOR,FIXED,COMPOSITION.
What parts can replace QH20306DFL1A?
There are 3 known substitutes for QH20306DFL1A: 7306DF, H20306DFL1215A, 20306DF. Substitute compatibility should be verified for your specific system.
What is the NSN for QH20306DFL1A?
QH20306DFL1A is cataloged in the U.S. Government catalog under NSN 3110-00-156-6803. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — QH20306DFL1A