PartsTable / COMPONENT / QD632
QD632 — Technical Data Sheet
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.531 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, cross-sectional_thickness: 0.015 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION, material_document_and_classification: MIL-G-12803,+1151-A MIL SPEC ALL MATERIAL RESPONSES OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-428-2159, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
QD632
NSN: 5330-00-428-2159 FSC: 5330 CAGE: 66289 — WISCONSIN MOTORS, LLC (USA)
SPECIFICATIONS
hole_diameter 0.531 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN cross-sectional_thickness 0.015 INCHES NOMINAL IN cross-sectional_shape_style SOLID SINGLE OR COMPOSITION material_document_and_classification MIL-G-12803,+1151-A MIL SPEC ALL MATERIAL RESPONSES OVERALL NSN 5330-00-428-2159
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: QD632
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
• CROSS-SECTIONAL THICKNESS: 0.015 INCHES NOMINAL IN
• HOLE DIAMETER: 0.531 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
• MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,+1151-A MIL SPEC ALL MATERIAL RESPONSES OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLE SOLID SINGLE OR COMPOSITION CROSS-SECTIONAL THICKNESS 0.015 INCHES NOMINAL IN HOLE DIAMETER 0.531 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN MATERIAL DOCUMENT AND CLASSIFICATION MIL-G-12803,+1151-A MIL SPEC ALL MATERIAL RESPONSES OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
P1416PC4 Interchangeable interchangeable cross-reference
interchangeable
33027 Interchangeable interchangeable cross-reference
interchangeable
549607PC4 Interchangeable interchangeable cross-reference
interchangeable
1A62-56 Interchangeable interchangeable cross-reference
interchangeable
616 Interchangeable interchangeable cross-reference
interchangeable
5119198 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy QD632?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is QD632?
QD632 is a GASKET.
What parts can replace QD632?
There are 7 known substitutes for QD632: P1416PC4, 33027, 549607PC4 and 4 more. Substitute compatibility should be verified for your specific system.
Is QD632 still available?
QD632 is currently cancelled.