PartsTable
Technical Data Sheet
Download PDF

QD611 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

QD611: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER AND RESIN NATURAL OR RESIN SYNTHETIC OVERALL, hole_diameter: 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, special_features: TWO BOLT HOLES 0.406 IN. DIA IN, bolt_hole_quantity: 16, cross-sectional_thickness: 0.031 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION.

This part is cataloged in the U.S. Government catalog under NSN 5330-00-536-8813, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
QD611
NSN: 5330-00-536-8813
FSC: 5330 — Packing and Gasket Materials
CAGE: 66289 — WISCONSIN MOTORS, LLC (USA)
SPECIFICATIONS
materialPAPER AND RESIN NATURAL OR RESIN SYNTHETIC OVERALL
hole_diameter0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
special_featuresTWO BOLT HOLES 0.406 IN. DIA IN
bolt_hole_quantity16
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-G-12803,NO. +3421-A MIL SPEC ALL MATERIAL RESPONSES OVERALL
NSN5330-00-536-8813
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: QD611 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,NO. +3421-A MIL SPEC ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
BOLT HOLE QUANTITY: 16
•
MATERIAL: PAPER AND RESIN NATURAL OR RESIN SYNTHETIC OVERALL
•
HOLE DIAMETER: 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803,NO. +3421-A MIL SPEC ALL MATERIAL RESPONSES OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
BOLT HOLE QUANTITY16
SPECIAL FEATURESTWO BOLT HOLES 0.406 IN. DIA IN
MATERIALPAPER AND RESIN NATURAL OR RESIN SYNTHETIC OVERALL
HOLE DIAMETER0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES 2
29149Reference document
Same NSN cross-reference
Reference document — Secondary reference
3-16QD611-147Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy QD611?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is QD611?
QD611 is a GASKET.
What parts can replace QD611?
There are 2 known substitutes for QD611: 29149, 3-16QD611-147. Substitute compatibility should be verified for your specific system.
What is the NSN for QD611?
QD611 is cataloged in the U.S. Government catalog under NSN 5330-00-536-8813. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — QD611