PartsTable
Technical Data Sheet
Download PDF

QAP-E-Q001 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

QAP-E-Q001: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include width: 36.000 INCHES NOMINAL IN, length: 1200.000 INCHES NOMINAL IN, material: STEEL COMP E4340 OR STEEL COMP 8740 OVERALL, pin_taper: 0.250 PER FOOT IN INCHES, thickness: 0.188 INCHES NOMINAL IN, head_style: FLAT COUNTERSUNK. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-184-8107, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
QAP-E-Q001
NSN: 5330-00-184-8107
NIINs: 001848107, 002905874, 003915074, 005166480, 009692199, 010644058, 012572611, 012636113, 012654796, 013650408
FSC: 5330 — Packing and Gasket Materials
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
width36.000 INCHES NOMINAL IN
length1200.000 INCHES NOMINAL IN
materialSTEEL COMP E4340 OR STEEL COMP 8740 OVERALL
pin_taper0.250 PER FOOT IN INCHES
thickness0.188 INCHES NOMINAL IN
head_styleFLAT COUNTERSUNK
grip_length2.365 INCHES MINIMUM AND 2.385 INCHES MAXIMUM IN
head_height0.188 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
recess_angle90.0 DEGREES NOMINAL
recess_depth0.040 INCHES NOMINAL IN
thread_class3A A
grip_diameter0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM IN
NSN5330-00-184-8107
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: QAP-E-Q001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 36.000 INCHES NOMINAL IN
•
NONDEFINITIVE SPEC/STD DATA: 1 CLASS
•
WIDTH: 36.000 INCHES NOMINAL IN
•
MATERIAL: CORK LOCATION NOT OTHERWISE SPECIFIED
•
THICKNESS: 0.188 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LENGTH36.000 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATA1 CLASS
SPECIAL FEATURES60 TO 75 DUROMETER RATING
WIDTH36.000 INCHES NOMINAL IN
MATERIALCORK LOCATION NOT OTHERWISE SPECIFIED
MATERIALRUBBER SYNTHETIC BINDER
THICKNESS0.188 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
MILG6183CLASS1Reference document
Same NSN cross-reference
Reference document — Identification reference
G6183ANDCLASSIReference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy QAP-E-Q001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is QAP-E-Q001?
QAP-E-Q001 is a BEARING,BALL,ANNULAR.
What parts can replace QAP-E-Q001?
There are 2 known substitutes for QAP-E-Q001: MILG6183CLASS1, G6183ANDCLASSI. Substitute compatibility should be verified for your specific system.
What is the NSN for QAP-E-Q001?
QAP-E-Q001 is cataloged in the U.S. Government catalog under NSN 5330-00-184-8107. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — QAP-E-Q001

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.