PartsTable
Technical Data Sheet
Download PDF

Q82 TYPE S — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

Q82 TYPE S: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER OVERALL, hardness_rating: 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL, peripheral_diameter: 13.500 INCHES NOMINAL IN, center_hole_diameter: 13.000 INCHES NOMINAL IN, cross-sectional_height: 0.250 INCHES NOMINAL IN, cross-sectional_shape_style: SPECIAL. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-551-9014, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
Q82 TYPE S
NSN: 5330-00-551-9014
FSC: 5330 — Packing and Gasket Materials
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER OVERALL
hardness_rating65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
peripheral_diameter13.500 INCHES NOMINAL IN
center_hole_diameter13.000 INCHES NOMINAL IN
cross-sectional_height0.250 INCHES NOMINAL IN
cross-sectional_shape_styleSPECIAL
material_document_and_classification366Y,FSCM 79689 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-551-9014
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: Q82 TYPE S MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.250 INCHES NOMINAL IN
•
HARDNESS RATING: 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 366Y,FSCM 79689 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
PERIPHERAL DIAMETER: 13.500 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 13.000 INCHES NOMINAL IN
•
MATERIAL: RUBBER OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.250 INCHES NOMINAL IN
HARDNESS RATING65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION366Y,FSCM 79689 MFR REF SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESPECIAL
PERIPHERAL DIAMETER13.500 INCHES NOMINAL IN
CENTER HOLE DIAMETER13.000 INCHES NOMINAL IN
MATERIALRUBBER OVERALL
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
CEC 0100Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy Q82 TYPE S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is Q82 TYPE S?
Q82 TYPE S is a PACKING,PREFORMED.
What parts can replace Q82 TYPE S?
There is 1 known substitute for Q82 TYPE S: CEC 0100. Substitute compatibility should be verified for your specific system.
What is the NSN for Q82 TYPE S?
Q82 TYPE S is cataloged in the U.S. Government catalog under NSN 5330-00-551-9014. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — Q82 TYPE S

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.