PartsTable
Technical Data Sheet
Download PDF

Q6M2.00 — PIN,QUICK RELEASE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

Q6M2.00: PIN,QUICK RELEASE.

The PIN,QUICK RELEASE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, grip_length: 2.000 INCHES NOMINAL IN, actuation_type: PULL AND PUSH, shank_diameter: 0.375 INCHES NOMINAL IN, style_designator: BUTTON, button_handle_diameter: 0.720 INCHES MINIMUM AND 1.070 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-553-1650, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
Q6M2.00
NSN: 5315-01-553-1650
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 09094 — QRP INC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
grip_length2.000 INCHES NOMINAL IN
actuation_typePULL AND PUSH
shank_diameter0.375 INCHES NOMINAL IN
detent_quantity2
style_designatorBUTTON
button_handle_diameter0.720 INCHES MINIMUM AND 1.070 INCHES MAXIMUM IN
end_item_identificationFIGHTER AIRCRAFT (F-18 E/F)
shoulder_to_head_end_distance0.440 INCHES NOMINAL IN
detent_to_tapered_end_distance0.365 INCHES NOMINAL IN
NSN5315-01-553-1650
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: Q6M2.00 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.375 INCHES NOMINAL IN
•
DETENT TO TAPERED END DISTANCE: 0.365 INCHES NOMINAL IN
•
DETENT QUANTITY: 2
•
BUTTON HANDLE DIAMETER: 0.720 INCHES MINIMUM AND 1.070 INCHES MAXIMUM IN
•
ACTUATION TYPE: PULL AND PUSH
•
STYLE DESIGNATOR: BUTTON
•
GRIP LENGTH: 2.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.375 INCHES NOMINAL IN
DETENT TO TAPERED END DISTANCE0.365 INCHES NOMINAL IN
DETENT QUANTITY2
BUTTON HANDLE DIAMETER0.720 INCHES MINIMUM AND 1.070 INCHES MAXIMUM IN
ACTUATION TYPEPULL AND PUSH
STYLE DESIGNATORBUTTON
GRIP LENGTH2.000 INCHES NOMINAL IN
END ITEM IDENTIFICATIONFIGHTER AIRCRAFT (F-18 E/F)
MATERIALSTEEL CORROSION RESISTING OVERALL
SHOULDER TO HEAD END DISTANCE0.440 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
92385A076Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy Q6M2.00?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is Q6M2.00?
Q6M2.00 is a PIN,QUICK RELEASE.
What parts can replace Q6M2.00?
There is 1 known substitute for Q6M2.00: 92385A076. Substitute compatibility should be verified for your specific system.
What is the NSN for Q6M2.00?
Q6M2.00 is cataloged in the U.S. Government catalog under NSN 5315-01-553-1650. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — Q6M2.00