Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER POLYMETHYLENE-PERFLUOROALKYLENE CLASS FKM OVERALL, temp_rating: -40.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL, special_features: FOR USE IN PHOSPHATE ESTER FLUID SERVICE; 60 DUROMETER HARDNESS SAND NON OIL-RESISTWNT SYNTHETIC RUBBER, peripheral_diameter: 2.675 INCHES MINIMUM AND 2.695 INCHES MAXIMUM IN, center_hole_diameter: 2.465 INCHES MINIMUM AND 2.485 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-074-6038, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
Q4333
NSN:5330-01-074-6038 FSC:5330 CAGE:07322 — MINNESOTA RUBBER CO (USA)
SPECIFICATIONS
material
RUBBER POLYMETHYLENE-PERFLUOROALKYLENE CLASS FKM OVERALL
temp_rating
-40.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating
65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
special_features
FOR USE IN PHOSPHATE ESTER FLUID SERVICE; 60 DUROMETER HARDNESS SAND NON OIL-RESISTWNT SYNTHETIC RUBBER
peripheral_diameter
2.675 INCHES MINIMUM AND 2.695 INCHES MAXIMUM IN
center_hole_diameter
2.465 INCHES MINIMUM AND 2.485 INCHES MAXIMUM IN
cross-sectional_height
0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
cross-sectional_shape_style
SPECIAL
material_document_and_classification
514AD FSCM 07322 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN
5330-01-074-6038
COMPONENT DIAGRAM
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-1149,TY 2 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR OVERALL
•
CROSS-SECTIONAL HEIGHT: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 2.465 INCHES MINIMUM AND 2.485 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
PERIPHERAL DIAMETER: 2.895 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATION
MIL-R-1149,TY 2 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL
RUBBER CHLOROPRENE CLASS CR OVERALL
CROSS-SECTIONAL HEIGHT
0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
CENTER HOLE DIAMETER
2.465 INCHES MINIMUM AND 2.485 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLE
SPECIAL
PERIPHERAL DIAMETER
2.895 INCHES NOMINAL IN
SPECIAL FEATURES
FOR USE IN PHOSPHATE ESTER FLUID SERVICE; 60 DUROMETER HARDNESS SAND NON OIL-RESISTWNT SYNTHETIC RUBBER
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is Q4333?
Q4333 is a PACKING,PREFORMED.
What parts can replace Q4333?
There are 8 known substitutes for Q4333: 1078025, Q4333-366Y, 4333 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for Q4333?
Q4333 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-074-6038. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.