PartsTable
Technical Data Sheet
Download PDF

Q4231 514 AD — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

Q4231 514 AD: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM OVERALL, hardness_rating: 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL, peripheral_diameter: 2.609 INCHES NOMINAL IN, center_hole_diameter: 2.599 INCHES MINIMUM AND 2.619 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN, cross-sectional_shape_style: SPECIAL. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-275-7794, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
Q4231 514 AD
NSN: 5330-01-275-7794
FSC: 5330 — Packing and Gasket Materials
CAGE: 07322 — MINNESOTA RUBBER CO (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM OVERALL
hardness_rating65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
peripheral_diameter2.609 INCHES NOMINAL IN
center_hole_diameter2.599 INCHES MINIMUM AND 2.619 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
cross-sectional_shape_styleSPECIAL
NSN5330-01-275-7794
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: Q4231 514 AD MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
HARDNESS RATING: 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
PERIPHERAL DIAMETER: 2.609 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 2.599 INCHES MINIMUM AND 2.619 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
HARDNESS RATING65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
CROSS-SECTIONAL SHAPE STYLESPECIAL
PERIPHERAL DIAMETER2.609 INCHES NOMINAL IN
CENTER HOLE DIAMETER2.599 INCHES MINIMUM AND 2.619 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM OVERALL
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 2
01-435-0353-4 PIECE 146Reference document
Same NSN cross-reference
Reference document — Secondary reference
4231-514ADReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy Q4231 514 AD?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is Q4231 514 AD?
Q4231 514 AD is a PACKING,PREFORMED.
What parts can replace Q4231 514 AD?
There are 2 known substitutes for Q4231 514 AD: 01-435-0353-4 PIECE 146, 4231-514AD. Substitute compatibility should be verified for your specific system.
What is the NSN for Q4231 514 AD?
Q4231 514 AD is cataloged in the U.S. Government catalog under NSN 5330-01-275-7794. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — Q4231 514 AD