PartsTable
Technical Data Sheet
PartsTable / COMPONENT / Q4116-366Y
Q4116-366Y ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include peripheral_diameter: 0.930 INCHES MINIMUM AND 0.954 INCHES MAXIMUM IN, center_hole_diameter: 0.732 INCHES MINIMUM AND 0.742 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN, cross-sectional_shape_style: SPECIAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-736-4176, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
Q4116-366Y
NSN: 5330-00-736-4176
FSC: 5330
CAGE: 07332 — WAUKESHA BEARINGS CORPORATION (USA)
SPECIFICATIONS
peripheral_diameter0.930 INCHES MINIMUM AND 0.954 INCHES MAXIMUM IN
center_hole_diameter0.732 INCHES MINIMUM AND 0.742 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
cross-sectional_shape_styleSPECIAL
NSN5330-00-736-4176
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: Q4116-366Y MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
CENTER HOLE DIAMETER: 0.732 INCHES MINIMUM AND 0.742 INCHES MAXIMUM IN
•
PERIPHERAL DIAMETER: 0.930 INCHES MINIMUM AND 0.954 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESPECIAL
CENTER HOLE DIAMETER0.732 INCHES MINIMUM AND 0.742 INCHES MAXIMUM IN
PERIPHERAL DIAMETER0.930 INCHES MINIMUM AND 0.954 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
Q4116-366YInterchangeable
interchangeable cross-reference
interchangeable
224011Interchangeable
interchangeable cross-reference
interchangeable
A51S39003-29Interchangeable
interchangeable cross-reference
interchangeable
MRQ14Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy Q4116-366Y?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is Q4116-366Y?
Q4116-366Y is a PACKING,PREFORMED.
What parts can replace Q4116-366Y?
There are 4 known substitutes for Q4116-366Y: Q4116-366Y, 224011, A51S39003-29 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for Q4116-366Y?
Q4116-366Y is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-736-4176. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — Q4116-366Y

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026