PartsTable
Technical Data Sheet
PartsTable / COMPONENT / Q4110514AD
Q4110514AD ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM OVERALL, temp_rating: -40.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL, peripheral_diameter: 0.561 INCHES MINIMUM AND 0.575 INCHES MAXIMUM IN, center_hole_diameter: 0.355 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-005-8184, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
Q4110514AD
NSN: 5330-00-005-8184
FSC: 5330
CAGE: 07322 — MINNESOTA RUBBER CO (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM OVERALL
temp_rating-40.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
peripheral_diameter0.561 INCHES MINIMUM AND 0.575 INCHES MAXIMUM IN
center_hole_diameter0.355 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
cross-sectional_shape_styleSPECIAL
material_document_and_classificationMIL-R-83248 TY 2,CL 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-005-8184
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: Q4110514AD MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PERIPHERAL DIAMETER: 0.561 INCHES MINIMUM AND 0.575 INCHES MAXIMUM IN
•
TEMP RATING: -40.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
CENTER HOLE DIAMETER: 0.355 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-83248 TY 2,CL 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
HARDNESS RATING: 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
PERIPHERAL DIAMETER0.561 INCHES MINIMUM AND 0.575 INCHES MAXIMUM IN
TEMP RATING-40.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESPECIAL
CENTER HOLE DIAMETER0.355 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-83248 TY 2,CL 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
HARDNESS RATING65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
0110Interchangeable
interchangeable cross-reference
interchangeable
79-1/4Interchangeable
interchangeable cross-reference
interchangeable
1B415-114Interchangeable
interchangeable cross-reference
interchangeable
136-126Interchangeable
interchangeable cross-reference
interchangeable
9626Interchangeable
interchangeable cross-reference
interchangeable
1442Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy Q4110514AD?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is Q4110514AD?
Q4110514AD is a PACKING,PREFORMED.
What parts can replace Q4110514AD?
There are 15 known substitutes for Q4110514AD: 0110, 79-1/4, 1B415-114 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for Q4110514AD?
Q4110514AD is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-005-8184. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — Q4110514AD

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026