PartsTable
Technical Data Sheet
Download PDF

Q4006-514AD — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

Q4006-514AD: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, hardness_rating: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM OVERALL, peripheral_diameter: 0.250 INCHES NOMINAL IN, center_hole_diameter: 0.125 INCHES NOMINAL IN, cross-sectional_height: 0.062 INCHES NOMINAL IN, cross-sectional_shape_style: SPECIAL. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-892-4147, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
Q4006-514AD
NSN: 5330-00-892-4147
FSC: 5330 — Packing and Gasket Materials
CAGE: 07332 — WAUKESHA BEARINGS CORPORATION (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
hardness_rating70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM OVERALL
peripheral_diameter0.250 INCHES NOMINAL IN
center_hole_diameter0.125 INCHES NOMINAL IN
cross-sectional_height0.062 INCHES NOMINAL IN
cross-sectional_shape_styleSPECIAL
nondefinitive_spec/std_data2 TYPE AND 1 CLASS
NSN5330-00-892-4147
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: Q4006-514AD MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.062 INCHES NOMINAL IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
PERIPHERAL DIAMETER: 0.250 INCHES NOMINAL IN
•
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 1 CLASS
•
CENTER HOLE DIAMETER: 0.125 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.062 INCHES NOMINAL IN
HARDNESS RATING70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM OVERALL
CROSS-SECTIONAL SHAPE STYLESPECIAL
PERIPHERAL DIAMETER0.250 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATA2 TYPE AND 1 CLASS
CENTER HOLE DIAMETER0.125 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
Q1VIT0NAReference document
Same NSN cross-reference
Reference document — Secondary reference
MILR25897CTYPE2CLASS1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy Q4006-514AD?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is Q4006-514AD?
Q4006-514AD is a PACKING,PREFORMED.
What parts can replace Q4006-514AD?
There are 2 known substitutes for Q4006-514AD: Q1VIT0NA, MILR25897CTYPE2CLASS1. Substitute compatibility should be verified for your specific system.
What is the NSN for Q4006-514AD?
Q4006-514AD is cataloged in the U.S. Government catalog under NSN 5330-00-892-4147. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — Q4006-514AD

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.