PartsTable
Technical Data Sheet
Download PDF

Q20201-5179U — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

Q20201-5179U: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL INNER RING, bore_shape: STRAIGHT, bore_diameter: 12.0 MILLIMETERS NOMINAL MM, contact_angle: 25.0 DEGREES MAXIMUM, overall_width: 10.0 MILLIMETERS NOMINAL MM, load_direction: ANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-183-6804, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
Q20201-5179U
NSN: 3110-00-183-6804
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 7X677 — GENERAL MOTORS LLC DBA GENERAL MOTORS LLC (USA)
SPECIFICATIONS
materialSTEEL INNER RING
bore_shapeSTRAIGHT
bore_diameter12.0 MILLIMETERS NOMINAL MM
contact_angle25.0 DEGREES MAXIMUM
overall_width10.0 MILLIMETERS NOMINAL MM
load_directionANGULAR
surface_finishGROUND
style_designatorCOUNTERBORED OUTER RING, NON-SEPARABLE
calibration_designatorC4X
overall_outside_diameter32.0 MILLIMETERS NOMINAL MM
retainer_fabrication_methodMACHINED
NSN3110-00-183-6804
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: Q20201-5179U · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: COUNTERBORED OUTER RING, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 32.0 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
•
CONTACT ANGLE: 25.0 DEGREES MAXIMUM
•
LOAD DIRECTION: ANGULAR
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMACHINED
SURFACE FINISHGROUND
STYLE DESIGNATORCOUNTERBORED OUTER RING, NON-SEPARABLE
OVERALL WIDTH10.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER32.0 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
CONTACT ANGLE25.0 DEGREES MAXIMUM
LOAD DIRECTIONANGULAR
BORE DIAMETER12.0 MILLIMETERS NOMINAL MM
MATERIALSTEEL OUTER RING
SUBSTITUTES & CROSS-REFERENCES 3
Q20201N05179Reference document
Same NSN cross-reference
Reference document — Secondary reference
Q20201-51790Reference document
Same NSN cross-reference
Reference document — Secondary reference
15948Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy Q20201-5179U?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is Q20201-5179U?
Q20201-5179U is a BEARING,BALL,ANNULAR.
What parts can replace Q20201-5179U?
There are 3 known substitutes for Q20201-5179U: Q20201N05179, Q20201-51790, 15948. Substitute compatibility should be verified for your specific system.
What is the NSN for Q20201-5179U?
Q20201-5179U is cataloged in the U.S. Government catalog under NSN 3110-00-183-6804. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — Q20201-5179U

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.