PartsTable
Technical Data Sheet
PartsTable / COMPONENT / Q0L19N01A
Q0L19N01A ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL BALL, bore_shape: STRAIGHT, bore_diameter: 95.00 MILLIMETERS NOMINAL MM, contact_angle: 25.0 DEGREES MAXIMUM, overall_width: 24.0 MILLIMETERS NOMINAL MM, load_direction: ANGULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-678-8060, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
Q0L19N01A
NSN: 3110-00-678-8060
FSC: 3110
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL BALL
bore_shapeSTRAIGHT
bore_diameter95.00 MILLIMETERS NOMINAL MM
contact_angle25.0 DEGREES MAXIMUM
overall_width24.0 MILLIMETERS NOMINAL MM
load_directionANGULAR
surface_finishGROUND
style_designatorCOUNTERBORED OUTER RING, NON-SEPARABLE
overall_outside_diameter145.00 MILLIMETERS NOMINAL MM
retainer_fabrication_methodMACHINED
standard_tolerance_designationABEC NO.1
NSN3110-00-678-8060
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: Q0L19N01A · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: ANGULAR
•
MATERIAL: STEEL OUTER RING
•
SURFACE FINISH: GROUND
•
CONTACT ANGLE: 25.0 DEGREES MAXIMUM
•
OVERALL OUTSIDE DIAMETER: 145.00 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS (FLIS)
RETAINER FABRICATION METHODMACHINED
BORE SHAPESTRAIGHT
LOAD DIRECTIONANGULAR
MATERIALSTEEL OUTER RING
SURFACE FINISHGROUND
CONTACT ANGLE25.0 DEGREES MAXIMUM
MATERIALSTEEL INNER RING
OVERALL OUTSIDE DIAMETER145.00 MILLIMETERS NOMINAL MM
STYLE DESIGNATORCOUNTERBORED OUTER RING, NON-SEPARABLE
MATERIALSTEEL BALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
92849Interchangeable
interchangeable cross-reference
interchangeable
2849Interchangeable
IBM POWER GXT135P graphics PCI Adapter
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy Q0L19N01A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is Q0L19N01A?
Q0L19N01A is a BEARING,BALL,ANNULAR.
What parts can replace Q0L19N01A?
There are 2 known substitutes for Q0L19N01A: 92849, 2849. Substitute compatibility should be verified for your specific system.
What is the NSN for Q0L19N01A?
Q0L19N01A is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-678-8060. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — Q0L19N01A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026