PartsTable
Technical Data Sheet
Download PDF

Q0L15DTX5A — BEARING,BALL,DUPLEX

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

Q0L15DTX5A: BEARING,BALL,DUPLEX.

The BEARING,BALL,DUPLEX is a the manufacturer industrial component. Key specifications include material: PLASTIC RETAINER, bore_diameter: 75.0 MILLIMETERS NOMINAL MM, overall_width: 40.0 MILLIMETERS NOMINAL MM, load_direction: ANGULAR, surface_finish: GROUND, special_features: 15.0 DEGREE ANGULARITY. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-068-8039, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
Q0L15DTX5A
NSN: 3110-00-068-8039
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
materialPLASTIC RETAINER
bore_diameter75.0 MILLIMETERS NOMINAL MM
overall_width40.0 MILLIMETERS NOMINAL MM
load_directionANGULAR
surface_finishGROUND
special_features15.0 DEGREE ANGULARITY
style_designatorCOUNTERBORED OUTER RINGS, NON-SEPARABLE, TANDEM MOUNTING
overall_outside_diameter115.00 MILLIMETERS NOMINAL MM
bearing_preload_designationMEDIUM
standard_tolerance_designationABEC NO.5
NSN3110-00-068-8039
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: Q0L15DTX5A · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
BEARING PRELOAD DESIGNATION: MEDIUM
•
STYLE DESIGNATOR: COUNTERBORED OUTER RINGS, NON-SEPARABLE, TANDEM MOUNTING
•
OVERALL OUTSIDE DIAMETER: 115.00 MILLIMETERS NOMINAL MM
•
LOAD DIRECTION: ANGULAR
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.5
TECHNICAL CHARACTERISTICS
SURFACE FINISHGROUND
BEARING PRELOAD DESIGNATIONMEDIUM
STYLE DESIGNATORCOUNTERBORED OUTER RINGS, NON-SEPARABLE, TANDEM MOUNTING
OVERALL WIDTH40.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER115.00 MILLIMETERS NOMINAL MM
LOAD DIRECTIONANGULAR
SPECIAL FEATURES15.0 DEGREE ANGULARITY
STANDARD TOLERANCE DESIGNATIONABEC NO.5
BORE DIAMETER75.0 MILLIMETERS NOMINAL MM
MATERIALSTEEL OUTER RING
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
BB2253Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy Q0L15DTX5A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is Q0L15DTX5A?
Q0L15DTX5A is a BEARING,BALL,DUPLEX.
What parts can replace Q0L15DTX5A?
There is 1 known substitute for Q0L15DTX5A: BB2253. Substitute compatibility should be verified for your specific system.
What is the NSN for Q0L15DTX5A?
Q0L15DTX5A is cataloged in the U.S. Government catalog under NSN 3110-00-068-8039. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — Q0L15DTX5A