PartsTable
Technical Data Sheet
PartsTable / COMPONENT / Q0L0DTX7CJ
Q0L0DTX7CJ ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: PLASTIC PHENOLIC RETAINER, bore_shape: STRAIGHT, bore_diameter: 35.00 MILLIMETERS NOMINAL MM, contact_angle: 25.0 DEGREES NOMINAL, overall_width: 14.00 MILLIMETERS NOMINAL MM, load_direction: ANGULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-120-5006, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
Q0L0DTX7CJ
NSN: 3110-01-120-5006
FSC: 3110
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
materialPLASTIC PHENOLIC RETAINER
bore_shapeSTRAIGHT
bore_diameter35.00 MILLIMETERS NOMINAL MM
contact_angle25.0 DEGREES NOMINAL
overall_width14.00 MILLIMETERS NOMINAL MM
load_directionANGULAR
surface_finishGROUND
style_designatorCOUNTERBORED OUTER RING, NON-SEPARABLE
lubrication_materialGREASE
overall_outside_diameter62.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
retainer_fabrication_methodMACHINED
NSN3110-01-120-5006
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: Q0L0DTX7CJ · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
•
SURFACE FINISH: GROUND
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
CONTACT ANGLE: 25.0 DEGREES NOMINAL
•
BORE SHAPE: STRAIGHT
•
RETAINER FABRICATION METHOD: MACHINED
•
LUBRICATION MATERIAL: GREASE
•
LOAD DIRECTION: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
SURFACE FINISHGROUND
INTERNAL FIT-UP DESIGNATIONSTANDARD
CONTACT ANGLE25.0 DEGREES NOMINAL
BORE SHAPESTRAIGHT
RETAINER FABRICATION METHODMACHINED
LUBRICATION MATERIALGREASE
LOAD DIRECTIONANGULAR
STANDARD TOLERANCE DESIGNATIONABEC NO.7
OVERALL WIDTH14.00 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
H0L07-5Interchangeable
interchangeable cross-reference
interchangeable
AA59628-407JAKTUInterchangeable
interchangeable cross-reference
interchangeable
FF-B-171/24-J07A6CInterchangeable
interchangeable cross-reference
interchangeable
3110007527800Interchangeable
interchangeable cross-reference
interchangeable
8350844Interchangeable
interchangeable cross-reference
interchangeable
FF-B-171/24-M17A2CInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy Q0L0DTX7CJ?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is Q0L0DTX7CJ?
Q0L0DTX7CJ is a BEARING,BALL,ANNULAR.
What parts can replace Q0L0DTX7CJ?
There are 9 known substitutes for Q0L0DTX7CJ: H0L07-5, AA59628-407JAKTU, FF-B-171/24-J07A6C and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for Q0L0DTX7CJ?
Q0L0DTX7CJ is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-120-5006. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — Q0L0DTX7CJ

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026