PartsTable
Technical Data Sheet
Download PDF

Q0L04-DTL-1A — BEARING,BALL,DUPLEX

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

Q0L04-DTL-1A: BEARING,BALL,DUPLEX.

The BEARING,BALL,DUPLEX is a the manufacturer industrial component. Key specifications include material: PLASTIC PHENOLIC SEPARATOR, bore_diameter: 0.7870 INCHES MINIMUM AND 0.7874 INCHES MAXIMUM IN, contact_angle: 15.0 DEGREES NOMINAL, overall_width: 0.9448 INCHES NOMINAL IN, load_direction: ANGULAR, surface_finish: UNGROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-171-9437, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
Q0L04-DTL-1A
NSN: 3110-01-171-9437
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
materialPLASTIC PHENOLIC SEPARATOR
bore_diameter0.7870 INCHES MINIMUM AND 0.7874 INCHES MAXIMUM IN
contact_angle15.0 DEGREES NOMINAL
overall_width0.9448 INCHES NOMINAL IN
load_directionANGULAR
surface_finishUNGROUND
style_designatorUNIVERSAL GROUND FACES, COUNTERBORED OUTER RING, SEPARABLE
overall_outside_diameter1.6530 INCHES MINIMUM AND 1.6535 INCHES MAXIMUM IN
NSN3110-01-171-9437
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: Q0L04-DTL-1A · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: UNGROUND
•
STYLE DESIGNATOR: UNIVERSAL GROUND FACES, COUNTERBORED OUTER RING, SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 1.6530 INCHES MINIMUM AND 1.6535 INCHES MAXIMUM IN
•
CONTACT ANGLE: 15.0 DEGREES NOMINAL
•
LOAD DIRECTION: ANGULAR
•
TEST DATA DOCUMENT: 53711-5189737 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
•
BORE DIAMETER: 0.7870 INCHES MINIMUM AND 0.7874 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE FINISHUNGROUND
STYLE DESIGNATORUNIVERSAL GROUND FACES, COUNTERBORED OUTER RING, SEPARABLE
OVERALL WIDTH0.9448 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER1.6530 INCHES MINIMUM AND 1.6535 INCHES MAXIMUM IN
CONTACT ANGLE15.0 DEGREES NOMINAL
LOAD DIRECTIONANGULAR
TEST DATA DOCUMENT53711-5189737 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
BORE DIAMETER0.7870 INCHES MINIMUM AND 0.7874 INCHES MAXIMUM IN
MATERIALSTEEL BALL
MATERIALPLASTIC PHENOLIC SEPARATOR
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 2
2926375Reference document
Same NSN cross-reference
Reference document — Secondary reference
5189737Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy Q0L04-DTL-1A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is Q0L04-DTL-1A?
Q0L04-DTL-1A is a BEARING,BALL,DUPLEX.
What parts can replace Q0L04-DTL-1A?
There are 2 known substitutes for Q0L04-DTL-1A: 2926375, 5189737. Substitute compatibility should be verified for your specific system.
What is the NSN for Q0L04-DTL-1A?
Q0L04-DTL-1A is cataloged in the U.S. Government catalog under NSN 3110-01-171-9437. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — Q0L04-DTL-1A