PartsTable
Technical Data Sheet
PartsTable / COMPONENT / Q06008
Q06008 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BAND,RETAINING is a the manufacturer industrial component. Key specifications include width: 1.000 INCHES NOMINAL IN, material: STEEL, end_style: SPLIT LOOP, thickness: 0.105 INCHES NOMINAL IN, slot_width: 0.187 INCHES NOMINAL IN, bend_radius: 1.937 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-081-4315, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
Q06008
NSN: 5340-00-081-4315
FSC: 5340
CAGE: 76700 — CUMMINS FILTRATION INC. (USA)
SPECIFICATIONS
width1.000 INCHES NOMINAL IN
materialSTEEL
end_styleSPLIT LOOP
thickness0.105 INCHES NOMINAL IN
slot_width0.187 INCHES NOMINAL IN
bend_radius1.937 INCHES NOMINAL IN
loop_radius0.219 INCHES NOMINAL IN
arc_angle_in_deg60.0
basic_shape_styleC
NSN5340-00-081-4315
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: Q06008 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BASIC SHAPE STYLE: C
•
WIDTH: 1.000 INCHES NOMINAL IN
•
MATERIAL: STEEL
•
LOOP RADIUS: 0.219 INCHES NOMINAL IN
•
END STYLE: SPLIT LOOP
•
THICKNESS: 0.105 INCHES NOMINAL IN
•
SLOT WIDTH: 0.187 INCHES NOMINAL IN
•
ARC ANGLE IN DEG: 60.0
TECHNICAL CHARACTERISTICS (FLIS)
BASIC SHAPE STYLEC
WIDTH1.000 INCHES NOMINAL IN
MATERIALSTEEL
LOOP RADIUS0.219 INCHES NOMINAL IN
END STYLESPLIT LOOP
THICKNESS0.105 INCHES NOMINAL IN
SLOT WIDTH0.187 INCHES NOMINAL IN
ARC ANGLE IN DEG60.0
BEND RADIUS1.937 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
6008Upgraded Successor
successor cross-reference
successor
65A81B846Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy Q06008?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is Q06008?
Q06008 is a BAND,RETAINING.
What parts can replace Q06008?
There are 2 known substitutes for Q06008: 6008, 65A81B846. Substitute compatibility should be verified for your specific system.
What is the NSN for Q06008?
Q06008 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-081-4315. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — Q06008

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026