PartsTable
Technical Data Sheet
PartsTable / COMPONENT / Q EDE HYCL/A031800
Q EDE HYCL/A031800 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The Q EDE HYCL/A031800 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-117-3717, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
Q EDE HYCL/A031800
NSN: 5340-01-117-3717
FSC: 5340
CAGE: Z0C81 — MERCEDES-BENZ AUSTRALIA/PACIFIC PTY LTD (AUS)
SPECIFICATIONS
Part NumberQ EDE HYCL/A031800
NSN5340-01-117-3717
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: Q EDE HYCL/A031800 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES DESIGNATOR: UNF ROD CONNECTION
•
FORK SPAN WIDTH: 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 0.151 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1010 OR STEEL COMP 1011 OVERALL
•
DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END: 1.540 INCHES MINIMUM AND 1.580 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
NOMINAL THREAD SIZE: 0.190 INCHES ROD CONNECTION IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD SERIES DESIGNATORUNF ROD CONNECTION
FORK SPAN WIDTH0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM IN
FORK ARM THICKNESS0.151 INCHES NOMINAL IN
MATERIALSTEEL COMP 1010 OR STEEL COMP 1011 OVERALL
DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END1.540 INCHES MINIMUM AND 1.580 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NOMINAL THREAD SIZE0.190 INCHES ROD CONNECTION IN
SPECIAL FEATURESSTEEL PIN INCLUDED
THREAD CLASS2B ROD CONNECTION
END RADIUS0.220 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
0360180Upgraded Successor
successor cross-reference
successor
MILC36699Upgraded Successor
successor cross-reference
successor
31800Upgraded Successor
successor cross-reference
successor
6515NCM020353Upgraded Successor
successor cross-reference
successor
02-0676Upgraded Successor
successor cross-reference
successor
309752Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy Q EDE HYCL/A031800?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is Q EDE HYCL/A031800?
Q EDE HYCL/A031800 is a Q EDE HYCL/A031800.
What parts can replace Q EDE HYCL/A031800?
There are 9 known substitutes for Q EDE HYCL/A031800: 0360180, MILC36699, 31800 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for Q EDE HYCL/A031800?
Q EDE HYCL/A031800 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-117-3717. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — Q EDE HYCL/A031800

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026