PartsTable
Technical Data Sheet
Download PDF

PX-8-CS — WASHER,SPRING TENSION

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

PX-8-CS: WASHER,SPRING TENSION.

The WASHER,SPRING TENSION is a the manufacturer industrial component. Key specifications include material: RUBBER NEOPRENE OVERALL, hole_diameter: 0.750 INCHES NOMINAL IN, overall_height: 0.094 INCHES NOMINAL IN, outside_diameter: 1.000 INCHES NOMINAL IN, style_designator: SPRING TENSION, surface_treatment: CADMIUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-236-2574, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PX-8-CS
NSN: 5310-01-236-2574
FSC: 5310 — Nuts and Washers
CAGE: 49367 — AMPHENOL CORPORATION DBA AMPHENOL AEROSPACE INDUSTRIAL DIV AMPHENOL AEROSPACE/PYLE NATIONAL (USA)
SPECIFICATIONS
materialRUBBER NEOPRENE OVERALL
hole_diameter0.750 INCHES NOMINAL IN
overall_height0.094 INCHES NOMINAL IN
outside_diameter1.000 INCHES NOMINAL IN
style_designatorSPRING TENSION
surface_treatmentCADMIUM OVERALL
material_thickness0.015 INCHES NOMINAL IN
supplementary_featuresEND ITEM NSN 2590-00-603-4831 WIRING HARNESS,MATES W/ CABLE GRIP BODY NSN 2920-00-825-1161 AND COMPRESSION NUT NSN 5975-00-548-6520,P/O NSN 5975-00-880-7644 CONDUCTOR ASSY
specification/standard_data19207-8763341 MANUFACTURERS SOURCE CONTROL
surface_treatment_document_and_classificationE4-1.9.17,TYPE 1,CLASS 2 MFR REF SINGLE TREATMENT RESPONSE OVERALL
NSN5310-01-236-2574
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: PX-8-CS · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: E4-1.9.17,TYPE 1,CLASS 2 MFR REF SINGLE TREATMENT RESPONSE OVERALL
•
SUPPLEMENTARY FEATURES: END ITEM NSN 2590-00-603-4831 WIRING HARNESS,MATES W/ CABLE GRIP BODY NSN 2920-00-825-1161 AND COMPRESSION NUT NSN 5975-00-548-6520,P/O NSN 5975-00-880-7644 CONDUCTOR ASSY
•
STYLE DESIGNATOR: SPRING TENSION
•
OUTSIDE DIAMETER: 1.000 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.015 INCHES NOMINAL IN
•
SPECIFICATION/STANDARD DATA: 19207-8763341 MANUFACTURERS SOURCE CONTROL
•
SURFACE TREATMENT: CADMIUM OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.094 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONE4-1.9.17,TYPE 1,CLASS 2 MFR REF SINGLE TREATMENT RESPONSE OVERALL
SUPPLEMENTARY FEATURESEND ITEM NSN 2590-00-603-4831 WIRING HARNESS,MATES W/ CABLE GRIP BODY NSN 2920-00-825-1161 AND COMPRESSION NUT NSN 5975-00-548-6520,P/O NSN 5975-00-880-7644 CONDUCTOR ASSY
STYLE DESIGNATORSPRING TENSION
OUTSIDE DIAMETER1.000 INCHES NOMINAL IN
MATERIAL THICKNESS0.015 INCHES NOMINAL IN
SPECIFICATION/STANDARD DATA19207-8763341 MANUFACTURERS SOURCE CONTROL
SURFACE TREATMENTCADMIUM OVERALL
MATERIALRUBBER NEOPRENE OVERALL
HOLE DIAMETER0.750 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 3
8763341-3Reference document
Same NSN cross-reference
Reference document — Secondary reference
WAS-92Reference document
Same NSN cross-reference
Reference document — Secondary reference
BUSH92Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy PX-8-CS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PX-8-CS?
PX-8-CS is a WASHER,SPRING TENSION.
What parts can replace PX-8-CS?
There are 3 known substitutes for PX-8-CS: 8763341-3, WAS-92, BUSH92. Substitute compatibility should be verified for your specific system.
What is the NSN for PX-8-CS?
PX-8-CS is cataloged in the U.S. Government catalog under NSN 5310-01-236-2574. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PX-8-CS

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.