PWA53804-22 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

PWA53804-22: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, overall_width: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN, material_thickness: 0.045 INCHES MINIMUM AND 0.057 INCHES MAXIMUM IN, loop_inside_diameter: 1.000 INCHES NOMINAL IN, distance_from_loop_center_to_tongue_end: 1.126 INCHES NOMINAL IN, center_to_center_distance_between_loop_and_mounting_hole: 0.898 INCHES MINIMUM AND 0.918 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-113-0900, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

PWA53804-22

NSN: 5340-01-113-0900
FSC: 5340 — Hardware, Commercial
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)

SPECIFICATIONS

diameter	0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
overall_width	0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
material_thickness	0.045 INCHES MINIMUM AND 0.057 INCHES MAXIMUM IN
loop_inside_diameter	1.000 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end	1.126 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole	0.898 INCHES MINIMUM AND 0.918 INCHES MAXIMUM IN
NSN	5340-01-113-0900

COMPONENT DIAGRAM

KEY FEATURES

•

DIAMETER: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.045 INCHES MINIMUM AND 0.057 INCHES MAXIMUM IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 1.126 INCHES NOMINAL IN

•

CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.898 INCHES MINIMUM AND 0.918 INCHES MAXIMUM IN

•

LOOP INSIDE DIAMETER: 1.000 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

DIAMETER	0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH	0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.045 INCHES MINIMUM AND 0.057 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END	1.126 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.898 INCHES MINIMUM AND 0.918 INCHES MAXIMUM IN
LOOP INSIDE DIAMETER	1.000 INCHES NOMINAL IN

OTHER ITEMS IN FSC 5340 — Hardware, Commercial

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275

SUBSTITUTES & CROSS-REFERENCES 2

MS9349-14Reference document

Same NSN cross-reference

Reference document — Secondary reference

SAE-AS9349Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy PWA53804-22?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is PWA53804-22?

PWA53804-22 is a CLAMP,LOOP.

What parts can replace PWA53804-22?

There are 2 known substitutes for PWA53804-22: MS9349-14, SAE-AS9349. Substitute compatibility should be verified for your specific system.

What is the NSN for PWA53804-22?

PWA53804-22 is cataloged in the U.S. Government catalog under NSN 5340-01-113-0900. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

PWA53804-22 — CLAMP,LOOP

Request a Quote — PWA53804-22