PartsTable
Technical Data Sheet
Download PDF

PWA53742-30 — PIN,GROOVED,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

PWA53742-30: PIN,GROOVED,HEADLESS.

The PIN,GROOVED,HEADLESS is a the manufacturer industrial component. Key specifications include diameter: 0.1873 INCHES MINIMUM AND 0.1877 INCHES MAXIMUM IN, material: STEEL OVERALL, overall_length: 0.688 INCHES NOMINAL IN, undercut_width: 0.094 INCHES NOMINAL IN, first_end_style: SQUARE, effective_length: 0.469 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-125-1406, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PWA53742-30
NSN: 5315-01-125-1406
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
diameter0.1873 INCHES MINIMUM AND 0.1877 INCHES MAXIMUM IN
materialSTEEL OVERALL
overall_length0.688 INCHES NOMINAL IN
undercut_width0.094 INCHES NOMINAL IN
first_end_styleSQUARE
effective_length0.469 INCHES NOMINAL IN
style_designatorGROOVE
undercut_diameter0.125 INCHES NOMINAL IN
first_end_locationBOTH ENDS
second_end_relationship_with_first_endIDENTICAL
NSN5315-01-125-1406
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: PWA53742-30 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
UNDERCUT WIDTH: 0.094 INCHES NOMINAL IN
•
UNDERCUT DIAMETER: 0.125 INCHES NOMINAL IN
•
FIRST END LOCATION: BOTH ENDS
•
FIRST END STYLE: SQUARE
•
STYLE DESIGNATOR: GROOVE
•
DIAMETER: 0.1873 INCHES MINIMUM AND 0.1877 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
TECHNICAL CHARACTERISTICS
UNDERCUT WIDTH0.094 INCHES NOMINAL IN
UNDERCUT DIAMETER0.125 INCHES NOMINAL IN
FIRST END LOCATIONBOTH ENDS
FIRST END STYLESQUARE
STYLE DESIGNATORGROOVE
DIAMETER0.1873 INCHES MINIMUM AND 0.1877 INCHES MAXIMUM IN
OVERALL LENGTH0.688 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
EFFECTIVE LENGTH0.469 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy PWA53742-30?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PWA53742-30?
PWA53742-30 is a PIN,GROOVED,HEADLESS.
What is the NSN for PWA53742-30?
PWA53742-30 is cataloged in the U.S. Government catalog under NSN 5315-01-125-1406. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PWA53742-30