PartsTable
Technical Data Sheet
Download PDF

PWA51154-7 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

PWA51154-7: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1018 OVERALL, fork_depth: 0.501 INCHES NOMINAL IN, hole_diameter: 0.250 INCHES NOMINAL IN, overall_width: 0.750 INCHES NOMINAL IN, overall_height: 0.750 INCHES NOMINAL IN, fork_span_width: 0.406 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-059-8255, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PWA51154-7
NSN: 5340-01-059-8255
FSC: 5340 — Hardware, Commercial
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialSTEEL COMP 1018 OVERALL
fork_depth0.501 INCHES NOMINAL IN
hole_diameter0.250 INCHES NOMINAL IN
overall_width0.750 INCHES NOMINAL IN
overall_height0.750 INCHES NOMINAL IN
fork_span_width0.406 INCHES NOMINAL IN
style_designatorCLEVIS
fork_arm_thickness0.172 INCHES NOMINAL IN
rod_connection_bore_depth0.812 INCHES NOMINAL IN
rod_connection_bore_diameter0.312 INCHES NOMINAL IN
material_document_and_classificationAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
distance_from_pivot_pinhole_center_to_rod_connection_end0.812 INCHES NOMINAL IN
NSN5340-01-059-8255
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PWA51154-7 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FORK SPAN WIDTH: 0.406 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.172 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
ROD CONNECTION BORE DIAMETER: 0.312 INCHES NOMINAL IN
•
ROD CONNECTION BORE DEPTH: 0.812 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.750 INCHES NOMINAL IN
FORK SPAN WIDTH0.406 INCHES NOMINAL IN
FORK ARM THICKNESS0.172 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH0.750 INCHES NOMINAL IN
ROD CONNECTION BORE DIAMETER0.312 INCHES NOMINAL IN
ROD CONNECTION BORE DEPTH0.812 INCHES NOMINAL IN
MATERIALSTEEL COMP 1018 OVERALL
FORK DEPTH0.501 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy PWA51154-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PWA51154-7?
PWA51154-7 is a CLEVIS,ROD END.
What is the NSN for PWA51154-7?
PWA51154-7 is cataloged in the U.S. Government catalog under NSN 5340-01-059-8255. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PWA51154-7

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.