PWA106337: GAGE BLOCK.
The GAGE BLOCK is a the manufacturer industrial component. Key specifications include material: STEEL, functional_description: PROVIDES A MEANS OF MEASURING WEAR BETWEEN THE LOCKING DETENT AND THE LIP OF THE CHIP COLLECTOR VALVE BODY., end_item_identification: C-17A SUPPORT EQUIP A, part_name_assigned_by_controlling_agency: GAGE, CHECKING-CHIP COLLECTOR WEAR LIMIT. This part is cataloged in the U.S.
Government catalog under NSN 5210-01-577-6485, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | STEEL |
| functional_description | PROVIDES A MEANS OF MEASURING WEAR BETWEEN THE LOCKING DETENT AND THE LIP OF THE CHIP COLLECTOR VALVE BODY. |
| end_item_identification | C-17A SUPPORT EQUIP A |
| part_name_assigned_by_controlling_agency | GAGE, CHECKING-CHIP COLLECTOR WEAR LIMIT |
| NSN | 5210-01-577-6485 |
| SPECIAL FEATURES | THE GAGE IS 2.00 IN LONG AND HAS A UNIFORM THICKNESS ON .19 IN. THE WIDTH IS 1.00 IN FOR APPOX 60 PERCENT OF THE LENGTH OF THE GAGE, THEN TAPERS DOWN TO A WIDTH OF .38 IN THE WIDER AREA OF THE GAGE HAS A RUBBER COATING COVERING THE SURFACE. THE NARROW SECTION IS NOT RUBBER COATED AND HAS TWO 0.78 IN DIA PINS PERPENDICULAR TO THE FACE OF THE GAGE. THE PINS ARE 0.0290IN APART FROM EACH OTHER. GAGE IS STORED IN A PLASTIC CASE WITH FOAM INSERTS. OPERATING TEMP -40 DEG F TO 125 DEG F. IN |
| FUNCTIONAL DESCRIPTION | PROVIDES A MEANS OF MEASURING WEAR BETWEEN THE LOCKING DETENT AND THE LIP OF THE CHIP COLLECTOR VALVE BODY. |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | GAGE, CHECKING-CHIP COLLECTOR WEAR LIMIT |
| END ITEM IDENTIFICATION | C-17A SUPPORT EQUIP A |
| MATERIAL | STEEL |
No substitute or cross-reference records for this part.