PartsTable
Technical Data Sheet
Download PDF

PW-10 — WRENCH,PIPE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

PW-10: WRENCH,PIPE.

The WRENCH,PIPE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 1.992 INCHES MINIMUM AND 2.017 INCHES MAXIMUM IN, overall_length: 10.000 INCHES NOMINAL IN, outside_diameter: 2.438 INCHES MINIMUM AND 2.468 INCHES MAXIMUM IN, special_features: PIPE CAPACITY 1-1/2 INCH IN, style_designator: STRAIGHT JAW. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-468-7152, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PW-10
NSN: 5310-01-468-7152
NIINs: 014687152, 015183395
FSC: 5310 — Nuts and Washers
CAGE: 79568 — WHITTET-HIGGINS COMPANY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter1.992 INCHES MINIMUM AND 2.017 INCHES MAXIMUM IN
overall_length10.000 INCHES NOMINAL IN
outside_diameter2.438 INCHES MINIMUM AND 2.468 INCHES MAXIMUM IN
special_featuresPIPE CAPACITY 1-1/2 INCH IN
style_designatorSTRAIGHT JAW
material_thickness0.059 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
external_key_quantity13
wrenching_surface_size1.500 INCHES MAXIMUM SINGLE END IN
end_item_identificationMONRAIL SWIT:WSD;TARAWA CLASSLHA
wrenching_surface_shapeRECTANGULAR SINGLE END EXTERNAL
internal_prebent_key_width0.250 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
NSN5310-01-468-7152
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: PW-10 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL PREBENT KEY WIDTH: 0.250 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
•
OVERALL DISTANCE INCLUDING KEYS: 3.031 INCHES MINIMUM AND 3.093 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: KEY
•
OUTSIDE DIAMETER: 2.438 INCHES MINIMUM AND 2.468 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.059 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
•
EXTERNAL STRAIGHT KEY WIDTH: 0.204 INCHES MINIMUM AND 0.234 INCHES MAXIMUM IN
•
EXTERNAL KEY QUANTITY: 13
•
INTERNAL PREBENT KEY LENGTH: 0.125 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
INTERNAL PREBENT KEY WIDTH0.250 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
OVERALL DISTANCE INCLUDING KEYS3.031 INCHES MINIMUM AND 3.093 INCHES MAXIMUM IN
STYLE DESIGNATORKEY
OUTSIDE DIAMETER2.438 INCHES MINIMUM AND 2.468 INCHES MAXIMUM IN
MATERIAL THICKNESS0.059 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
EXTERNAL STRAIGHT KEY WIDTH0.204 INCHES MINIMUM AND 0.234 INCHES MAXIMUM IN
EXTERNAL KEY QUANTITY13
INTERNAL PREBENT KEY LENGTH0.125 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONMONRAIL SWIT:WSD;TARAWA CLASSLHA
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
528-7378786 PC57Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
7378786Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy PW-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PW-10?
PW-10 is a WRENCH,PIPE.
What parts can replace PW-10?
There are 2 known substitutes for PW-10: 528-7378786 PC57, 7378786. Substitute compatibility should be verified for your specific system.
What is the NSN for PW-10?
PW-10 is cataloged in the U.S. Government catalog under NSN 5310-01-468-7152. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PW-10

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.