PartsTable
Technical Data Sheet
PartsTable / COMPONENT / PVS1K7
PVS1K7 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 0.2500 INCHES NOMINAL IN, overall_width: 0.1970 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-554-3440, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PVS1K7
NSN: 3110-00-554-3440
FSC: 3110
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter0.2500 INCHES NOMINAL IN
overall_width0.1970 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
overall_outside_diameter0.6250 INCHES NOMINAL IN
internal_fit-up_designationLOOSE
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.5
NSN3110-00-554-3440
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: PVS1K7 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOAD DIRECTION: RADIAL
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.5
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
SURFACE FINISH: GROUND
•
BORE DIAMETER: 0.2500 INCHES NOMINAL IN
•
RETAINER FABRICATION METHOD: PRESSED
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.1970 INCHES NOMINAL IN
LOAD DIRECTIONRADIAL
STANDARD TOLERANCE DESIGNATIONABEC NO.5
MATERIALSTEEL OVERALL
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISHGROUND
BORE DIAMETER0.2500 INCHES NOMINAL IN
RETAINER FABRICATION METHODPRESSED
OVERALL OUTSIDE DIAMETER0.6250 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
10107390Interchangeable
interchangeable cross-reference
interchangeable
SSR4RA3P15L01Interchangeable
interchangeable cross-reference
interchangeable
R4XR1JInterchangeable
interchangeable cross-reference
interchangeable
3110001599239Interchangeable
interchangeable cross-reference
interchangeable
23060Interchangeable
interchangeable cross-reference
interchangeable
504C-4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy PVS1K7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PVS1K7?
PVS1K7 is a BEARING,BALL,ANNULAR.
What parts can replace PVS1K7?
There are 23 known substitutes for PVS1K7: 10107390, SSR4RA3P15L01, R4XR1J and 20 more. Substitute compatibility should be verified for your specific system.
Is PVS1K7 still available?
PVS1K7 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PVS1K7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026