PartsTable
Technical Data Sheet
Download PDF

PTC21100001BL — SLIDE,DRAWER,EXTENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

PTC21100001BL: SLIDE,DRAWER,EXTENSION.

The SLIDE,DRAWER,EXTENSION is a the manufacturer industrial component. Key specifications include width: 32.1410 INCHES MINIMUM AND 32.1880 INCHES MAXIMUM IN, material: STEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OVERALL, closed_length: 22.970 INCHES MINIMUM AND 23.030 INCHES MAXIMUM IN, extended_length: 20.9400 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S), style_designator: 2 - MEMBER. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-161-9467, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PTC21100001BL
NSN: 5340-00-161-9467
FSC: 5340 — Hardware, Commercial
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
width32.1410 INCHES MINIMUM AND 32.1880 INCHES MAXIMUM IN
materialSTEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OVERALL
closed_length22.970 INCHES MINIMUM AND 23.030 INCHES MAXIMUM IN
extended_length20.9400 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
style_designator2 - MEMBER
surface_treatmentCADMIUM AND CHROMATE OVERALL
side_for_which_designedLEFT HAND
material_document_and_classificationQQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TYPE 2,CLASS 1 FED SPEC ALL TREATMENT RESPONSES OVERALL
NSN5340-00-161-9467
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PTC21100001BL MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 1 FED SPEC ALL TREATMENT RESPONSES OVERALL
•
EXTENDED LENGTH: 20.9400 INCHES NOMINAL IN
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
STYLE DESIGNATOR: 2 - MEMBER
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CLOSED LENGTH: 22.970 INCHES MINIMUM AND 23.030 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
WIDTH: 32.1410 INCHES MINIMUM AND 32.1880 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 1 FED SPEC ALL TREATMENT RESPONSES OVERALL
EXTENDED LENGTH20.9400 INCHES NOMINAL IN
MOUNTING METHODUNTHREADED HOLE(S)
STYLE DESIGNATOR2 - MEMBER
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
CLOSED LENGTH22.970 INCHES MINIMUM AND 23.030 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
WIDTH32.1410 INCHES MINIMUM AND 32.1880 INCHES MAXIMUM IN
MATERIALSTEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OVERALL
SIDE FOR WHICH DESIGNEDLEFT HAND
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
PTC2110001BLSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
374112-4Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy PTC21100001BL?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PTC21100001BL?
PTC21100001BL is a SLIDE,DRAWER,EXTENSION.
What parts can replace PTC21100001BL?
There are 2 known substitutes for PTC21100001BL: PTC2110001BL, 374112-4. Substitute compatibility should be verified for your specific system.
What is the NSN for PTC21100001BL?
PTC21100001BL is cataloged in the U.S. Government catalog under NSN 5340-00-161-9467. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PTC21100001BL

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.