PartsTable
Technical Data Sheet
Download PDF

PSN3037BC-B — CASTER,SWIVEL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

PSN3037BC-B: CASTER,SWIVEL.

The CASTER,SWIVEL is a the manufacturer industrial component. Key specifications include material: RUBBER TREAD, stem_style: THREADED, wheel_type: BALL, coating_method: PLATED BODY, wheel_diameter: 3.000 INCHES NOMINAL IN, effective_height: 3.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-068-3562, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PSN3037BC-B
NSN: 5340-01-068-3562
FSC: 5340 — Hardware, Commercial
CAGE: 13113 — SHEPHERD PRODUCTS U S INC (USA)
SPECIFICATIONS
materialRUBBER TREAD
stem_styleTHREADED
wheel_typeBALL
coating_methodPLATED BODY
wheel_diameter3.000 INCHES NOMINAL IN
wheel_quantity1
effective_height3.250 INCHES NOMINAL IN
special_featuresBRIGHT FINISH,W/BRAKE
style_designatorSWIVEL OFFSET-BALL TYPE
surface_treatmentCHROMIUM BODY
wheel_bearing_typePLAIN, SELF-LUBRICATED
stem_thread_diameter0.375 INCHES NOMINAL IN
NSN5340-01-068-3562
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PSN3037BC-B MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STEM THREAD DIAMETER: 0.375 INCHES NOMINAL IN
•
STEM THREAD QUANTITY PER INCH: 16
•
WHEEL TYPE: BALL
•
COATING METHOD: PLATED BODY
•
STYLE DESIGNATOR: SWIVEL OFFSET-BALL TYPE
•
STEM STYLE: THREADED
•
WHEEL QUANTITY: 1
•
EFFECTIVE HEIGHT: 3.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STEM THREAD DIAMETER0.375 INCHES NOMINAL IN
STEM THREAD QUANTITY PER INCH16
WHEEL TYPEBALL
COATING METHODPLATED BODY
STYLE DESIGNATORSWIVEL OFFSET-BALL TYPE
STEM STYLETHREADED
WHEEL QUANTITY1
EFFECTIVE HEIGHT3.250 INCHES NOMINAL IN
SAFE OPERATING LOAD RATING100.0 POUNDS NOMINAL LBS
SPECIAL FEATURESBRIGHT FINISH,W/BRAKE
SUBSTITUTES & CROSS-REFERENCES 3
344168Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
96618Reference document
Same NSN cross-reference
Reference document — Secondary reference
SN37BC-BXReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy PSN3037BC-B?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PSN3037BC-B?
PSN3037BC-B is a CASTER,SWIVEL.
What parts can replace PSN3037BC-B?
There are 3 known substitutes for PSN3037BC-B: 344168, 96618, SN37BC-BX. Substitute compatibility should be verified for your specific system.
What is the NSN for PSN3037BC-B?
PSN3037BC-B is cataloged in the U.S. Government catalog under NSN 5340-01-068-3562. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PSN3037BC-B