PartsTable
Technical Data Sheet
Download PDF

PS209P — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

PS209P: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_width: 3.930 INCHES NOMINAL IN, first_leg_length: 1.280 INCHES NOMINAL IN, second_leg_style: SQUARE, second_leg_width: 3.930 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-051-2508, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PS209P
NSN: 5340-01-051-2508
FSC: 5340 — Hardware, Commercial
CAGE: 18925 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV PNEUMATIC DIVISION (USA)
SPECIFICATIONS
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleSQUARE
first_leg_width3.930 INCHES NOMINAL IN
first_leg_length1.280 INCHES NOMINAL IN
second_leg_styleSQUARE
second_leg_width3.930 INCHES NOMINAL IN
style_designatorANGLE
NSN5340-01-051-2508
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PS209P MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG WIDTH: 3.930 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ANGLE
•
FIRST LEG STYLE: SQUARE
•
FIRST LEG LENGTH: 1.280 INCHES NOMINAL IN
•
FIRST LEG WIDTH: 3.930 INCHES NOMINAL IN
•
SECOND LEG STYLE: SQUARE
TECHNICAL CHARACTERISTICS
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG WIDTH3.930 INCHES NOMINAL IN
STYLE DESIGNATORANGLE
FIRST LEG STYLESQUARE
FIRST LEG LENGTH1.280 INCHES NOMINAL IN
FIRST LEG WIDTH3.930 INCHES NOMINAL IN
SECOND LEG STYLESQUARE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
PS209Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy PS209P?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PS209P?
PS209P is a BRACKET,ANGLE.
What parts can replace PS209P?
There is 1 known substitute for PS209P: PS209. Substitute compatibility should be verified for your specific system.
What is the NSN for PS209P?
PS209P is cataloged in the U.S. Government catalog under NSN 5340-01-051-2508. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PS209P