PartsTable
Technical Data Sheet
PartsTable / COMPONENT / PS1KDD7FS37701
PS1KDD7FS37701 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 0.2500 INCHES NOMINAL IN, overall_width: 0.1970 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-861-7323, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PS1KDD7FS37701
NSN: 3110-00-861-7323
FSC: 3110
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter0.2500 INCHES NOMINAL IN
overall_width0.1970 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
shield_quantity2
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
lubrication_materialGREASE
overall_outside_diameter0.6250 INCHES NOMINAL IN
nondefinitive_spec/std_data115 TYPE AND 00 GRADE
NSN3110-00-861-7323
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: PS1KDD7FS37701 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
BORE DIAMETER: 0.2500 INCHES NOMINAL IN
•
OVERALL OUTSIDE DIAMETER: 0.6250 INCHES NOMINAL IN
•
INTERNAL CLEARANCE: 0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
•
RETAINER FABRICATION METHOD: PRESSED
•
LUBRICATION MATERIAL: GREASE
•
BORE SHAPE: STRAIGHT
•
SHIELD QUANTITY: 2
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
BORE DIAMETER0.2500 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER0.6250 INCHES NOMINAL IN
INTERNAL CLEARANCE0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
RETAINER FABRICATION METHODPRESSED
LUBRICATION MATERIALGREASE
BORE SHAPESTRAIGHT
SHIELD QUANTITY2
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONASUM 100,AMERICAN OIL CO MFR REF SINGLE MATERIAL RESPONSE
STANDARD TOLERANCE DESIGNATIONABEC NO.1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
53202001Interchangeable
interchangeable cross-reference
interchangeable
55926001Interchangeable
interchangeable cross-reference
interchangeable
KC040CP0Interchangeable
interchangeable cross-reference
interchangeable
L-110 RGH B0REInterchangeable
interchangeable cross-reference
interchangeable
AL-110-SOX INSERTInterchangeable
interchangeable cross-reference
interchangeable
L110S0XInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy PS1KDD7FS37701?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PS1KDD7FS37701?
PS1KDD7FS37701 is a BEARING,BALL,ANNULAR.
What parts can replace PS1KDD7FS37701?
There are 22 known substitutes for PS1KDD7FS37701: 53202001, 55926001, KC040CP0 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for PS1KDD7FS37701?
PS1KDD7FS37701 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-861-7323. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PS1KDD7FS37701

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026