PartsTable
Technical Data Sheet
PartsTable / O-RING / PS1-30-5-39
PS1-30-5-39 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, center_hole_diameter: 6.711 INCHES MINIMUM AND 6.757 INCHES MAXIMUM IN, cross-sectional_height: 0.139 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-197-9606, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PS1-30-5-39
NSN: 5331-00-197-9606
FSC: 5331 — O-RING
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
center_hole_diameter6.711 INCHES MINIMUM AND 6.757 INCHES MAXIMUM IN
cross-sectional_height0.139 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN5331-00-197-9606
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PS1-30-5-39 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.139 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 6.711 INCHES MINIMUM AND 6.757 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.139 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
CENTER HOLE DIAMETER6.711 INCHES MINIMUM AND 6.757 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
AS28775-261Interchangeable
interchangeable cross-reference
interchangeable
Z00.N7423069255Interchangeable
interchangeable cross-reference
interchangeable
A49408MZZInterchangeable
interchangeable cross-reference
interchangeable
N91-81639Interchangeable
Same NIIN cross-reference
interchangeable
N304-7-39Interchangeable
Same NIIN cross-reference
interchangeable
A395X105Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy PS1-30-5-39?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PS1-30-5-39?
PS1-30-5-39 is a O-RING.
What parts can replace PS1-30-5-39?
There are 11 known substitutes for PS1-30-5-39: AS28775-261, Z00.N7423069255, A49408MZZ and 8 more. Substitute compatibility should be verified for your specific system.
Is PS1-30-5-39 still available?
PS1-30-5-39 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PS1-30-5-39

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026