PartsTable
Technical Data Sheet
PartsTable / O-RING / PRP914-4-1101-70
PRP914-4-1101-70 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q, temp_rating: -85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.062 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-531-2845, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PRP914-4-1101-70
NSN: 5331-00-531-2845
FSC: 5331 — O-RING
CAGE: 25184 — PARKER HANNIFIN CORPORATION DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q
temp_rating-85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF
hardness_rating70.0 SHORE DUROMETER A NOMINAL
elongation_percentage125 MAXIMUM
cross-sectional_height0.062 INCHES NOMINAL IN
NSN5331-00-531-2845
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PRP914-4-1101-70 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
TEMP RATING: -85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF
•
MATERIAL: RUBBER SILICONE CLASS Q
•
CROSS-SECTIONAL HEIGHT: 0.062 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
ELONGATION PERCENTAGE125 MAXIMUM
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
TEMP RATING-85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF
MATERIALRUBBER SILICONE CLASS Q
CROSS-SECTIONAL HEIGHT0.062 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
8019136P41Interchangeable
interchangeable cross-reference
interchangeable
C9857PInterchangeable
interchangeable cross-reference
interchangeable
197-8-210SInterchangeable
interchangeable cross-reference
interchangeable
ES455-2Interchangeable
interchangeable cross-reference
interchangeable
7601509-4Interchangeable
interchangeable cross-reference
interchangeable
9-6Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy PRP914-4-1101-70?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PRP914-4-1101-70?
PRP914-4-1101-70 is a O-RING.
What parts can replace PRP914-4-1101-70?
There are 15 known substitutes for PRP914-4-1101-70: 8019136P41, C9857P, 197-8-210S and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for PRP914-4-1101-70?
PRP914-4-1101-70 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-531-2845. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PRP914-4-1101-70

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026