PartsTable / O-RING / PRP90-6
PRP90-6
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 2.484 INCHES MINIMUM AND 2.540 INCHES MAXIMUM IN, center_hole_diameter: 2.224 INCHES MINIMUM AND 2.244 INCHES MAXIMUM IN, elongation_percentage: 331 MAXIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-984-3762, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
PRP90-6
NSN: 5331-00-984-3762 FSC: 5331 — O-RINGCAGE: 91265 — PARKER-HANNIFIN CORPORATION DIV O-RING DIVISION (USA)
SPECIFICATIONS
material RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR temp_rating -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF hardness_rating 70.0 SHORE DUROMETER A NOMINAL outside_diameter 2.484 INCHES MINIMUM AND 2.540 INCHES MAXIMUM IN center_hole_diameter 2.224 INCHES MINIMUM AND 2.244 INCHES MAXIMUM IN elongation_percentage 331 MAXIMUM cross-sectional_height 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN NSN 5331-00-984-3762
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: PRP90-6
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
• OUTSIDE DIAMETER: 2.484 INCHES MINIMUM AND 2.540 INCHES MAXIMUM IN
• HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
• TEMP RATING: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
• ELONGATION PERCENTAGE: 331 MAXIMUM
• CENTER HOLE DIAMETER: 2.224 INCHES MINIMUM AND 2.244 INCHES MAXIMUM IN
• CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR END ITEM IDENTIFICATION AIRCRAFT, ORION P-3; SYSTEMS, JP-5 AVIATION FUELS; LANDING CRAFT, UTILITY, 115 FT; TICONDEROGA CLASS CG (47); STURGEON CLASS SSN (637); SHIPBOARD MATERIAL HANDLING EQUIPMENT (MHE); SPRUANCE CLASS DD (963); CHILLED WATER A/C SYSTEMS; SUPPORT EQUIPMENT, B-1 AIRCRAFT; TRUCK, FIRE/CRASH P15 FT OUTSIDE DIAMETER 2.484 INCHES MINIMUM AND 2.540 INCHES MAXIMUM IN HARDNESS RATING 70.0 SHORE DUROMETER A NOMINAL TEMP RATING -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF ELONGATION PERCENTAGE 331 MAXIMUM CENTER HOLE DIAMETER 2.224 INCHES MINIMUM AND 2.244 INCHES MAXIMUM IN CROSS-SECTIONAL HEIGHT 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
BTC9478 Interchangeable interchangeable cross-reference
interchangeable
NRC2228 Interchangeable interchangeable cross-reference
interchangeable
2228 Interchangeable interchangeable cross-reference
interchangeable
U165 Interchangeable interchangeable cross-reference
interchangeable
V165 Interchangeable interchangeable cross-reference
interchangeable
878228 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy PRP90-6?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PRP90-6?
PRP90-6 is a O-RING.
What parts can replace PRP90-6?
There are 30 known substitutes for PRP90-6: BTC9478, NRC2228, 2228 and 27 more. Substitute compatibility should be verified for your specific system.
Is PRP90-6 still available?
PRP90-6 is currently cancelled.
Request a Quote — PRP90-6