PartsTable
Technical Data Sheet
PartsTable / O-RING / PRP6227-9
PRP6227-9 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, temp_rating: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF, outside_diameter: 0.630 INCHES NOMINAL IN, center_hole_diameter: 0.419 INCHES MINIMUM AND 0.429 INCHES MAXIMUM IN, elongation_percentage: 160 MAXIMUM, cross-sectional_height: 0.094 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-801-2922, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PRP6227-9
NSN: 5331-00-801-2922
FSC: 5331 — O-RING
CAGE: 77308 — PARCO, LLC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
temp_rating-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
outside_diameter0.630 INCHES NOMINAL IN
center_hole_diameter0.419 INCHES MINIMUM AND 0.429 INCHES MAXIMUM IN
elongation_percentage160 MAXIMUM
cross-sectional_height0.094 INCHES NOMINAL IN
NSN5331-00-801-2922
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PRP6227-9 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.419 INCHES MINIMUM AND 0.429 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.630 INCHES NOMINAL IN
•
ELONGATION PERCENTAGE: 160 MAXIMUM
•
TEMP RATING: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.094 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.419 INCHES MINIMUM AND 0.429 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.630 INCHES NOMINAL IN
ELONGATION PERCENTAGE160 MAXIMUM
TEMP RATING-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.094 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
1240S-20K-1Interchangeable
interchangeable cross-reference
interchangeable
RS2B-B20001FInterchangeable
interchangeable cross-reference
interchangeable
SA31 20KOHM +-1PERCEInterchangeable
interchangeable cross-reference
interchangeable
028 09378 000Interchangeable
interchangeable cross-reference
interchangeable
D50265 ITEM 30Interchangeable
interchangeable cross-reference
interchangeable
NK1648Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy PRP6227-9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PRP6227-9?
PRP6227-9 is a O-RING.
What parts can replace PRP6227-9?
There are 13 known substitutes for PRP6227-9: 1240S-20K-1, RS2B-B20001F, SA31 20KOHM +-1PERCE and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for PRP6227-9?
PRP6227-9 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-801-2922. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PRP6227-9

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026