PartsTable
Technical Data Sheet
PartsTable / O-RING / PRP568-456-4067-70
PRP568-456-4067-70 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q, outside_diameter: 13.943 INCHES MINIMUM AND 14.107 INCHES MAXIMUM IN, center_hole_diameter: 13.445 INCHES MINIMUM AND 13.505 INCHES MAXIMUM IN, cross-sectional_height: 0.267 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-928-6980, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PRP568-456-4067-70
NSN: 5331-00-928-6980
FSC: 5331 — O-RING
CAGE: 77308 — PARCO, LLC (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q
outside_diameter13.943 INCHES MINIMUM AND 14.107 INCHES MAXIMUM IN
center_hole_diameter13.445 INCHES MINIMUM AND 13.505 INCHES MAXIMUM IN
cross-sectional_height0.267 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
NSN5331-00-928-6980
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PRP568-456-4067-70 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 13.943 INCHES MINIMUM AND 14.107 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 13.445 INCHES MINIMUM AND 13.505 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.267 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SILICONE CLASS Q
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER13.943 INCHES MINIMUM AND 14.107 INCHES MAXIMUM IN
CENTER HOLE DIAMETER13.445 INCHES MINIMUM AND 13.505 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.267 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
MATERIALRUBBER SILICONE CLASS Q
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
2456Interchangeable
interchangeable cross-reference
interchangeable
122498Interchangeable
interchangeable cross-reference
interchangeable
87Interchangeable
interchangeable cross-reference
interchangeable
AN6227B83Interchangeable
interchangeable cross-reference
interchangeable
AN6227B-40Interchangeable
interchangeable cross-reference
interchangeable
AN6227-83Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy PRP568-456-4067-70?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PRP568-456-4067-70?
PRP568-456-4067-70 is a O-RING.
What parts can replace PRP568-456-4067-70?
There are 23 known substitutes for PRP568-456-4067-70: 2456, 122498, 87 and 20 more. Substitute compatibility should be verified for your specific system.
Is PRP568-456-4067-70 still available?
PRP568-456-4067-70 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PRP568-456-4067-70

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026