PartsTable
Technical Data Sheet
PartsTable / O-RING / PRP3-910-19357
PRP3-910-19357 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, temp_rating: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM, outside_diameter: 0.934 INCHES MINIMUM AND 0.964 INCHES MAXIMUM IN, center_hole_diameter: 0.746 INCHES MINIMUM AND 0.764 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-020-0067, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PRP3-910-19357
NSN: 5331-00-020-0067
FSC: 5331 — O-RING
CAGE: 25184 — PARKER HANNIFIN CORPORATION DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
temp_rating-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM
outside_diameter0.934 INCHES MINIMUM AND 0.964 INCHES MAXIMUM IN
center_hole_diameter0.746 INCHES MINIMUM AND 0.764 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.094 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
end_item_identificationMRAP - COUGAR CAT1; MRAP - M-ATV UI
nondefinitive_spec/std_data1 TYPE AND 1 CLASS
material_document_and_classificationMIL-R-83248, CL1 MIL SPEC SINGLE MATERIAL RESPONSE
NSN5331-00-020-0067
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PRP3-910-19357 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.094 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-83248, CL1 MIL SPEC SINGLE MATERIAL RESPONSE
•
HARDNESS RATING: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 1 CLASS
•
OUTSIDE DIAMETER: 0.934 INCHES MINIMUM AND 0.964 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.094 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-83248, CL1 MIL SPEC SINGLE MATERIAL RESPONSE
END ITEM IDENTIFICATIONMRAP - COUGAR CAT1; MRAP - M-ATV UI
HARDNESS RATING70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM
MATERIALRUBBER FLUOROCARBON CLASS FPM
ELONGATION PERCENTAGE125 MAXIMUM
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 1 CLASS
OUTSIDE DIAMETER0.934 INCHES MINIMUM AND 0.964 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.746 INCHES MINIMUM AND 0.764 INCHES MAXIMUM IN
TEMP RATING-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 34
M83248/1-912Interchangeable
interchangeable cross-reference
interchangeable
516-5486651-F70Interchangeable
interchangeable cross-reference
interchangeable
04052333002424Interchangeable
interchangeable cross-reference
interchangeable
ARP568-116MILG23652TY2Interchangeable
interchangeable cross-reference
interchangeable
AS3208-10Interchangeable
interchangeable cross-reference
interchangeable
SAE-AMS7276Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy PRP3-910-19357?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PRP3-910-19357?
PRP3-910-19357 is a O-RING.
What parts can replace PRP3-910-19357?
There are 34 known substitutes for PRP3-910-19357: M83248/1-912, 516-5486651-F70, 04052333002424 and 31 more. Substitute compatibility should be verified for your specific system.
Is PRP3-910-19357 still available?
PRP3-910-19357 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PRP3-910-19357

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026