PartsTable
Technical Data Sheet
Download PDF

PRP211C0MP8309 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

PRP211C0MP8309: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER OVERALL, hardness_rating: 85.0 SHORE DUROMETER A MINIMUM AND 95.0 SHORE DUROMETER A MAXIMUM OVERALL, center_hole_diameter: 0.790 INCHES MINIMUM AND 0.802 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN, cross-sectional_shape_style: O-RING, material_document_and_classification: 8309,FSCM 86579 MFR REF SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-473-5705, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PRP211C0MP8309
NSN: 5330-00-473-5705
FSC: 5330 — Packing and Gasket Materials
CAGE: D7040 — TRELLEBORG SEALING SOLUTIONS GERMANY GMBH (DEU)
SPECIFICATIONS
materialRUBBER OVERALL
hardness_rating85.0 SHORE DUROMETER A MINIMUM AND 95.0 SHORE DUROMETER A MAXIMUM OVERALL
center_hole_diameter0.790 INCHES MINIMUM AND 0.802 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
cross-sectional_shape_styleO-RING
material_document_and_classification8309,FSCM 86579 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-473-5705
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PRP211C0MP8309 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
HARDNESS RATING: 85.0 SHORE DUROMETER A MINIMUM AND 95.0 SHORE DUROMETER A MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 8309,FSCM 86579 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: O-RING
•
CENTER HOLE DIAMETER: 0.790 INCHES MINIMUM AND 0.802 INCHES MAXIMUM IN
•
MATERIAL: RUBBER OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
HARDNESS RATING85.0 SHORE DUROMETER A MINIMUM AND 95.0 SHORE DUROMETER A MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION8309,FSCM 86579 MFR REF SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLEO-RING
CENTER HOLE DIAMETER0.790 INCHES MINIMUM AND 0.802 INCHES MAXIMUM IN
MATERIALRUBBER OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
6.56824-0320Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy PRP211C0MP8309?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PRP211C0MP8309?
PRP211C0MP8309 is a PACKING,PREFORMED.
What parts can replace PRP211C0MP8309?
There is 1 known substitute for PRP211C0MP8309: 6.56824-0320. Substitute compatibility should be verified for your specific system.
What is the NSN for PRP211C0MP8309?
PRP211C0MP8309 is cataloged in the U.S. Government catalog under NSN 5330-00-473-5705. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PRP211C0MP8309

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.