PartsTable
Technical Data Sheet
Download PDF

PRP111-11646 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

PRP111-11646: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include center_hole_diameter: 0.411 INCHES MINIMUM AND 0.427 INCHES MAXIMUM IN, cross-sectional_height: 0.098 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN, specification/standard_data: 81755-C007 MANUFACTURERS SPECIFICATION CONTROL. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-225-7761, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PRP111-11646
NSN: 5330-00-225-7761
FSC: 5330 — Packing and Gasket Materials
CAGE: 25184 — PARKER HANNIFIN CORPORATION DIV O-RING DIVISION (USA)
SPECIFICATIONS
center_hole_diameter0.411 INCHES MINIMUM AND 0.427 INCHES MAXIMUM IN
cross-sectional_height0.098 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
specification/standard_data81755-C007 MANUFACTURERS SPECIFICATION CONTROL
NSN5330-00-225-7761
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PRP111-11646 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.098 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
SPECIFICATION/STANDARD DATA: 81755-C007 MANUFACTURERS SPECIFICATION CONTROL
•
COLOR: RED
•
CENTER HOLE DIAMETER: 0.411 INCHES MINIMUM AND 0.427 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.098 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
SPECIFICATION/STANDARD DATA81755-C007 MANUFACTURERS SPECIFICATION CONTROL
COLORRED
CENTER HOLE DIAMETER0.411 INCHES MINIMUM AND 0.427 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 8
MILR25988ESReference document
Same NSN cross-reference
Reference document — Secondary reference
2-111L449-6Reference document
Same NSN cross-reference
Reference document — Secondary reference
660004P47Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
C007-111Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
S2A111Reference document
Same NSN cross-reference
Reference document — Secondary reference
S10A103-042Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy PRP111-11646?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PRP111-11646?
PRP111-11646 is a PACKING,PREFORMED.
What parts can replace PRP111-11646?
There are 8 known substitutes for PRP111-11646: MILR25988ES, 2-111L449-6, 660004P47 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for PRP111-11646?
PRP111-11646 is cataloged in the U.S. Government catalog under NSN 5330-00-225-7761. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PRP111-11646