PartsTable
Technical Data Sheet
PartsTable / O-RING / PRP 163/7507
PRP 163/7507 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PRP 163/7507 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-015-6360, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PRP 163/7507
NSN: 5331-01-015-6360
FSC: 5331 — O-RING
CAGE: 25184 — PARKER HANNIFIN CORPORATION DIV O-RING DIVISION (USA)
SPECIFICATIONS
Part NumberPRP 163/7507
NSN5331-01-015-6360
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PRP 163/7507 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ELONGATION PERCENTAGE: 331 MAXIMUM
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CROSS-SECTIONAL HEIGHT: 0.103 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 5.952 INCHES MINIMUM AND 6.022 INCHES MAXIMUM IN
•
TEMP RATING: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
OUTSIDE DIAMETER: 6.152 INCHES MINIMUM AND 6.234 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
ELONGATION PERCENTAGE331 MAXIMUM
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CROSS-SECTIONAL HEIGHT0.103 INCHES NOMINAL IN
CENTER HOLE DIAMETER5.952 INCHES MINIMUM AND 6.022 INCHES MAXIMUM IN
TEMP RATING-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
OUTSIDE DIAMETER6.152 INCHES MINIMUM AND 6.234 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
2163Interchangeable
interchangeable cross-reference
interchangeable
443-1434-001Interchangeable
interchangeable cross-reference
interchangeable
16383-07Interchangeable
interchangeable cross-reference
interchangeable
425-0001-000Interchangeable
interchangeable cross-reference
interchangeable
NE24336TInterchangeable
interchangeable cross-reference
interchangeable
DIE734UInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy PRP 163/7507?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PRP 163/7507?
PRP 163/7507 is a PRP 163/7507.
What parts can replace PRP 163/7507?
There are 25 known substitutes for PRP 163/7507: 2163, 443-1434-001, 16383-07 and 22 more. Substitute compatibility should be verified for your specific system.
What is the NSN for PRP 163/7507?
PRP 163/7507 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-015-6360. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PRP 163/7507

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026