PartsTable
Technical Data Sheet
PartsTable / COMPONENT / PR4004/01
PR4004/01 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PR4004/01 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-120-2035, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PR4004/01
NSN: 5340-00-120-2035
FSC: 5340
CAGE: A167N — SAAB AKTIEBOLAG (SWE)
SPECIFICATIONS
Part NumberPR4004/01
NSN5340-00-120-2035
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PR4004/01 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.020 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.064 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
•
LOOP/HOLDING DIMENSION: 0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
•
WIDTH: 0.410 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
LENGTH: 0.420 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO END: 0.120 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.020 INCHES NOMINAL IN
HOLE DIAMETER0.064 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
OVERALL HEIGHT0.200 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
LOOP/HOLDING DIMENSION0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
WIDTH0.410 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
LENGTH0.420 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END0.120 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
8440Interchangeable
interchangeable cross-reference
interchangeable
10020610Interchangeable
interchangeable cross-reference
interchangeable
3223563-4Interchangeable
interchangeable cross-reference
interchangeable
99056009Interchangeable
interchangeable cross-reference
interchangeable
10117261Interchangeable
Same NIIN cross-reference
interchangeable
7109041-001Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy PR4004/01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PR4004/01?
PR4004/01 is a PR4004/01.
What parts can replace PR4004/01?
There are 8 known substitutes for PR4004/01: 8440, 10020610, 3223563-4 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for PR4004/01?
PR4004/01 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-120-2035. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PR4004/01

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026