PPF1355V3-5H — SCREW,CLOSE TOLERANCE

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

PPF1355V3-5H: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: TITANIUM ALLOY OVERALL, hole_type: DRILLED, head_style: PAN NO. 2, grip_length: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN, head_height: 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN, thread_class: 3A A.

This part is cataloged in the U.S. Government catalog under NSN 5305-01-199-2224, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

PPF1355V3-5H

NSN: 5305-01-199-2224
FSC: 5305 — Screws
CAGE: 27624 — SPS TECHNOLOGIES LLC DBA PB FASTENERS DIV PB FASTENERS (USA)

SPECIFICATIONS

material	TITANIUM ALLOY OVERALL
hole_type	DRILLED
head_style	PAN NO. 2
grip_length	0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
head_height	0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
thread_class	3A A
grip_diameter	0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
head_diameter	0.360 INCHES MINIMUM AND 0.374 INCHES MAXIMUM IN
hole_diameter	0.032 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
hole_quantity	1
thread_length	0.338 INCHES MINIMUM AND 0.388 INCHES MAXIMUM IN
surface_finish	32.0 MICROINCHES BEARING SURFACE OF HEAD
NSN	5305-01-199-2224

COMPONENT DIAGRAM

KEY FEATURES

•

SURFACE FINISH: 32.0 MICROINCHES THREADS

•

HEAD HEIGHT: 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.660 INCHES MINIMUM AND 0.690 INCHES MAXIMUM IN

•

THREAD LENGTH: 0.338 INCHES MINIMUM AND 0.388 INCHES MAXIMUM IN

•

HOLE CONFIGURATION STYLE: ROUND

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 4967 COMP 6AL4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL

TECHNICAL CHARACTERISTICS

SURFACE FINISH	32.0 MICROINCHES THREADS
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
HEAD HEIGHT	0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
FASTENER LENGTH	0.660 INCHES MINIMUM AND 0.690 INCHES MAXIMUM IN
THREAD LENGTH	0.338 INCHES MINIMUM AND 0.388 INCHES MAXIMUM IN
HOLE CONFIGURATION STYLE	ROUND
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 4967 COMP 6AL4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER	0.190 INCHES IN
HEAD STYLE	PAN NO. 2

OTHER ITEMS IN FSC 5305 — Screws

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753

SUBSTITUTES & CROSS-REFERENCES 3

GB511DU3V5HReference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

MATP111VH3-5Reference document

Same NSN cross-reference

Reference document — Secondary reference

PBF1355V3-5HReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required

Ready to buy PPF1355V3-5H?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is PPF1355V3-5H?

PPF1355V3-5H is a SCREW,CLOSE TOLERANCE.

What parts can replace PPF1355V3-5H?

There are 3 known substitutes for PPF1355V3-5H: GB511DU3V5H, MATP111VH3-5, PBF1355V3-5H. Substitute compatibility should be verified for your specific system.

What is the NSN for PPF1355V3-5H?

PPF1355V3-5H is cataloged in the U.S. Government catalog under NSN 5305-01-199-2224. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

PPF1355V3-5H — SCREW,CLOSE TOLERANCE

Request a Quote — PPF1355V3-5H