PartsTable
Technical Data Sheet
Download PDF

PPDC2HK — CAP,PROTECTIVE,DUST AND MOISTURE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

PPDC2HK: CAP,PROTECTIVE,DUST AND MOISTURE.

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: PLASTIC, design_type: FRICTION, overall_diameter: 1.170 INCHES NOMINAL IN, inside_diameter_length: 0.940 INCHES NOMINAL IN, end_item_identification: W/S:TICONDEROGA CLASS CG (47); WHIDBEY ISLAND CLASS LSD; AIRCRAFT, HORNET F/A-18; NIMITZ CLASS CVN, round_cap_outside_surface_condition: SMOOTH. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-349-2510, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PPDC2HK
NSN: 5340-00-349-2510
NIINs: 003492510, 011520950
FSC: 5340 — Hardware, Commercial
CAGE: 73992 — TUTHILL CORP HANSEN COUPLING DIV (USA)
SPECIFICATIONS
materialPLASTIC
design_typeFRICTION
overall_diameter1.170 INCHES NOMINAL IN
inside_diameter_length0.940 INCHES NOMINAL IN
end_item_identificationW/S:TICONDEROGA CLASS CG (47); WHIDBEY ISLAND CLASS LSD; AIRCRAFT, HORNET F/A-18; NIMITZ CLASS CVN
round_cap_outside_surface_conditionSMOOTH
opening_inside_diameter_for_which_designed0.850 INCHES NOMINAL IN
NSN5340-00-349-2510
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PPDC2HK MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: FRICTION
•
OVERALL DIAMETER: 1.100 INCHES MINIMUM AND 1.200 INCHES MAXIMUM IN
•
OPENING INSIDE DIAMETER FOR WHICH DESIGNED: 0.590 INCHES NOMINAL IN
•
MATERIAL: PLASTIC
•
INSIDE DIAMETER LENGTH: 1.020 INCHES MINIMUM AND 1.120 INCHES MAXIMUM IN
•
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
TECHNICAL CHARACTERISTICS
DESIGN TYPEFRICTION
OVERALL DIAMETER1.100 INCHES MINIMUM AND 1.200 INCHES MAXIMUM IN
OPENING INSIDE DIAMETER FOR WHICH DESIGNED0.590 INCHES NOMINAL IN
MATERIALPLASTIC
INSIDE DIAMETER LENGTH1.020 INCHES MINIMUM AND 1.120 INCHES MAXIMUM IN
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
SUBSTITUTES & CROSS-REFERENCES 1
2143974-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy PPDC2HK?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PPDC2HK?
PPDC2HK is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace PPDC2HK?
There is 1 known substitute for PPDC2HK: 2143974-1. Substitute compatibility should be verified for your specific system.
What is the NSN for PPDC2HK?
PPDC2HK is cataloged in the U.S. Government catalog under NSN 5340-00-349-2510. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PPDC2HK