PartsTable
Technical Data Sheet
PartsTable / COMPONENT / PP047BFC
PP047BFC ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 40.0 MILLIMETERS NOMINAL MM, contact_angle: 35.0 DEGREES NOMINAL, overall_width: 1.4375 INCHES NOMINAL IN, alignment_type: RIGID. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-250-6792, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PP047BFC
NSN: 3110-01-250-6792
FSC: 3110
CAGE: 59180 — CIRCOR PUMPS NORTH AMERICA LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter40.0 MILLIMETERS NOMINAL MM
contact_angle35.0 DEGREES NOMINAL
overall_width1.4375 INCHES NOMINAL IN
alignment_typeRIGID
load_directionANGULAR
surface_finishGROUND
style_designatorLOADING GROOVE, NON-SEPARABLE
overall_outside_diameter90.0 MILLIMETERS NOMINAL MM
internal_fit-up_designationLOOSE
retainer_fabrication_methodPRESSED
NSN3110-01-250-6792
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: PP047BFC · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
LOAD DIRECTION: ANGULAR
•
STYLE DESIGNATOR: LOADING GROOVE, NON-SEPARABLE
•
MATERIAL: STEEL OVERALL
•
RETAINER FABRICATION METHOD: PRESSED
•
OVERALL OUTSIDE DIAMETER: 90.0 MILLIMETERS NOMINAL MM
•
ALIGNMENT TYPE: RIGID
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
LOAD DIRECTIONANGULAR
OVERALL WIDTH1.4375 INCHES NOMINAL IN
STYLE DESIGNATORLOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL OVERALL
RETAINER FABRICATION METHODPRESSED
OVERALL OUTSIDE DIAMETER90.0 MILLIMETERS NOMINAL MM
ALIGNMENT TYPERIGID
BORE SHAPESTRAIGHT
BORE DIAMETER40.0 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
45305PPInterchangeable
interchangeable cross-reference
interchangeable
55605Interchangeable
interchangeable cross-reference
interchangeable
G170-4Interchangeable
interchangeable cross-reference
interchangeable
5306X3017AInterchangeable
interchangeable cross-reference
interchangeable
BS4-1657-58Interchangeable
interchangeable cross-reference
interchangeable
A-A-59641Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy PP047BFC?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PP047BFC?
PP047BFC is a BEARING,BALL,ANNULAR.
What parts can replace PP047BFC?
There are 30 known substitutes for PP047BFC: 45305PP, 55605, G170-4 and 27 more. Substitute compatibility should be verified for your specific system.
What is the NSN for PP047BFC?
PP047BFC is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-250-6792. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PP047BFC

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026