PartsTable
Technical Data Sheet
PartsTable / COMPONENT / PP-2
PP-2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The DISK,CLUTCH,VEHICULAR is a the manufacturer industrial component. Key specifications include diameter: 0.167 INCHES NOMINAL IN, material: PLASTIC POLYAMIDE NYLON BAND, brush_type: PAD, brush_shape: FLAT, overall_width: 18.000 INCHES IN, overall_length: 18.000 INCHES IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-001-9107, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PP-2
NSN: 5340-00-001-9107
FSC: 5340
CAGE: 06383 — PANDUIT CORP. (USA)
SPECIFICATIONS
diameter0.167 INCHES NOMINAL IN
materialPLASTIC POLYAMIDE NYLON BAND
brush_typePAD
brush_shapeFLAT
overall_width18.000 INCHES IN
overall_length18.000 INCHES IN
brush_edge_typeCHISELED
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleCORNER RADIUS
first_leg_width0.750 INCHES NOMINAL IN
brush_part_width2.000 INCHES NOMINAL IN
first_leg_length1.100 INCHES NOMINAL IN
NSN5340-00-001-9107
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PP-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG LENGTH: 1.100 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.192 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
•
FIRST LEG WIDTH: 0.750 INCHES NOMINAL IN
•
FIRST LEG STYLE: CORNER RADIUS
•
SECOND LEG WIDTH: 0.750 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ANGLE
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.480 INCHES NOMINAL IN
•
FIRST LEG THICKNESS: 0.150 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
FIRST LEG LENGTH1.100 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.192 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
FIRST LEG WIDTH0.750 INCHES NOMINAL IN
FIRST LEG STYLECORNER RADIUS
SECOND LEG WIDTH0.750 INCHES NOMINAL IN
STYLE DESIGNATORANGLE
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.480 INCHES NOMINAL IN
FIRST LEG THICKNESS0.150 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLEONE HOLE
MATERIALPLASTIC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
WC3-16-4Upgraded Successor
successor cross-reference
successor
772Upgraded Successor
successor cross-reference
successor
1JA7562H10Upgraded Successor
successor cross-reference
successor
PP25Interchangeable
interchangeable cross-reference
interchangeable
31-1A3987Interchangeable
interchangeable cross-reference
interchangeable
1182Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy PP-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PP-2?
PP-2 is a DISK,CLUTCH,VEHICULAR.
What parts can replace PP-2?
There are 16 known substitutes for PP-2: WC3-16-4, 772, 1JA7562H10 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for PP-2?
PP-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-001-9107. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PP-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026