The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q, special_features: ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER PHILADELPHIAPRODUCTION STANDARD NO. PO0394NRP, center_hole_diameter: 1.041 INCHES MINIMUM AND 1.073 INCHES MAXIMUM IN, cross-sectional_height: 0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN, criticality_code_justification: ZZZY.
This part is cataloged in the U.S. Government catalog under NSN 5331-01-062-6884, indicating validated use in U.S. government and defense logistics supply chains.
Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
PO0394NRP
NSN:5331-01-062-6884 FSC:5331 — O-ring CAGE:14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
material
RUBBER SILICONE CLASS Q
special_features
ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER PHILADELPHIAPRODUCTION STANDARD NO. PO0394NRP
center_hole_diameter
1.041 INCHES MINIMUM AND 1.073 INCHES MAXIMUM IN
cross-sectional_height
0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
criticality_code_justification
ZZZY
reference_number_differentiating_characteristics
REFERENCE NUMBER DIFFERENTIATING MATERIAL WILL BE IN ACCORDANCE WITH NAVAL INVENTORY CONTROL POINT ACTIVITY HX QUALITY CONTROL. MANUFACTURING AND TESTING SPECIFICATIONS AVAILABLE AT THE DLA ICP
NSN
5331-01-062-6884
COMPONENT DIAGRAM
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
CENTER HOLE DIAMETER: 1.041 INCHES MINIMUM AND 1.073 INCHES MAXIMUM IN
•
TEST DATA DOCUMENT: 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
MATERIAL: RUBBER SILICONE CLASS Q
•
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: REFERENCE NUMBER DIFFERENTIATING MATERIAL WILL BE IN ACCORDANCE WITH NAVAL INVENTORY CONTROL POINT ACTIVITY HX QUALITY CONTROL. MANUFACTURING AND TESTING SPECIFICATIONS AVAILABLE AT THE DLA ICP
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT
0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
CRITICALITY CODE JUSTIFICATION
ZZZY
SPECIAL FEATURES
ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER PHILADELPHIAPRODUCTION STANDARD NO. PO0394NRP
CENTER HOLE DIAMETER
1.041 INCHES MINIMUM AND 1.073 INCHES MAXIMUM IN
TEST DATA DOCUMENT
81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
MATERIAL
RUBBER SILICONE CLASS Q
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
REFERENCE NUMBER DIFFERENTIATING MATERIAL WILL BE IN ACCORDANCE WITH NAVAL INVENTORY CONTROL POINT ACTIVITY HX QUALITY CONTROL. MANUFACTURING AND TESTING SPECIFICATIONS AVAILABLE AT THE DLA ICP
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PO0394NRP?
PO0394NRP is a O-RING.
What parts can replace PO0394NRP?
There is 1 known substitute for PO0394NRP: 10210-2. Substitute compatibility should be verified for your specific system.
What is the NSN for PO0394NRP?
PO0394NRP is cataloged in the U.S. Government catalog under NSN 5331-01-062-6884. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.